07-18-2018 09:09 AM - edited 07-05-2021 08:52 AM
Hi,
we just deployed a new infrastructure based on 16 2802E APs on a 2504+HA WLC in Local Mode with RRM configured both on 2.4 and 5Ghz.
WLC is v. 8.5.131.0.
I have selected on the DCA on 5ghz these options
Unfortunately, even after Freeze+Invoke Channel Update and also config ap reset, the result is still this:
I am quite confused, as I've seen one of the antennas just yesterday starting to broadcast on an 80mhz channel, but this won't happen any longer today. As you can see it's all automatic.
Any thoughts? Something that might be missing?
Thank you for your help.
Solved! Go to Solution.