07-31-2018 05:05 PM - edited 03-01-2019 08:48 AM
Hello all,
I'm trying to upgrade a pair of 9148 MDS switches from 6.2(21) to 6.2(23). I am getting an image verification error when running "sh install all impact":
MDS-B# sh install all impact kickstart bootflash:m9100-s3ek9-kickstart-mz.6.2.23.bin system bootflash:m9100-s3ek9-mz.6.2.23.bin Installer will perform impact only check. Please wait. Verifying image bootflash:/m9100-s3ek9-kickstart-mz.6.2.23.bin for boot variable "kickstart". [# ] 0% -- FAIL. Pre-upgrade check failed. Return code 0x40930011 (Image verification failed).
I've verified the MD5 on both images on the switch to ensure they copied over intact.
MDS-B# sh file bootflash:m9100-s3ek9-mz.6.2.23.bin md5sum 0fec5ac4d2437d08398181812d054f73 MDS-B# sh file bootflash:m9100-s3ek9-kickstart-mz.6.2.23.bin md5sum a8cbaf73e3d6f2be93cf9c47f5900716
Both switches have plenty of space in bootflash, and were reloaded before attempting the install. Any thoughts? I don't see anything in the release notes for 6.2(23) or 6.2(21) that would explain why I might be seeing this issue.