09-01-2018 01:48 AM
Hi All,
I've been experiencing an issue with the latest version of firmware (1.4.2.19) for the RV325 small business router. If I attempt to manage the device using the web based admin interface from a VLAN other than the default VLAN (1), I receive a 403 forbidden error message when I enter my login credentials and attempt to login. I have been able to replicate this on a factory reset RV325 using the following steps.
1. Set new password on default account (as required).
2. Enable VLAN's under Port Management, VLAN Membership.
3. Create a new VLAN, enable Device Management.
4. Set a switchport to be an untagged member of the new VLAN.
5. Restart the router.
6. Connect PC to the switchport that is an untagged member of the new VLAN.
7. Navigate to the devices web based admin interface and enter login credentials.
Following the above steps should hopefully re-create the error. I'd be interested if anyone had any other experiences. Grateful for any advice as to how I could resolve this problem.
Thank you,
Tim