Hello. I would like to request assistance with a password recovery.
I am working on a Cisco 7606-S Switch and a 7600 Series Route Switch Processor 720 with Multilayer Switch Feature Card.
I have copied the newest IOS (c7600rsp72043-adventerprisek9-mz.155-3.S8.bin) to a newly formatted flash card. I use this image to boot the cards from ROMMON.
The problem is this, the cards boot successfully with the IOS, however an old configuration loads with the IOS and the credentials are unknown.
I have used the "confreg 0x2102" and other "confreg 0x0" options with the same outcome. I have removed all flash media disks from disk1, and the two internal flash media disks from the card. All of these options result in the loading of the old configuration with the new IOS.
How can I remove this configuration and clean boot from the newly downloaded IOS.
Thank you in advance for your help.
