cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

Beginner

Set up SNMP between subnets on RV325

I hope I'm asking a fairly simple question.  My office originally had a single subnet (10.10.10.0/24) and we had a group of APC UPS devices on the network that could control some embedded systems.  As part of a network upgrade, they have since been moved to a new VLAN (10.10.20.0/24), except now we're getting errors between the APC and our host PC's:

 

2018-09-25 09:48:26,304 - WARNING - APC failure to bulk set parameter for outlets [1, 2, 3, 17, 18, 19, 22, 23, 24] to 2, error_indication = "No SNMP response received before timeout", error_status = 0, error_index = 0, sending retry #1 ..

 

It makes sense since SNMP are basically UDP, so they're not being routed, but the errors are bad as we have test scripts that expect the SNMP feedback.  Can I set up my RV325 to let the SNMP packets migrate between VLANs and if so, how?

 

Thanks,

 

Matt

Everyone's tags (3)
Who Me Too'd this topic