I am new to nexus. I am trying to connected Fabric extender N2K-C2332TQ-10GT to N5K-C5672UP. But the fex state is showing offline. Can any one please help me to fix this issue
I am using QSFP to connect from N5K to N2K
Please find the below results
sh fex
FEX FEX FEX FEX Fex
Number Description State Model Serial
------------------------------------------------------------------------
103 FEX0103 Offline N2K-C2332TQ-10GT FOC2219R
*****************************************************************
sh fex detail
FEX: 103 Description: FEX0103 state: Offline
FEX version: Unknown [Switch version: 7.1(0)N1(1b)]
FEX Interim version: Unknown
Switch Interim version: 7.1(0)N1(1b)
Module Sw Gen: 0 [Switch Sw Gen: 21]
post level: complete
pinning-mode: static Max-links: 1
Fabric port for control traffic: Eth2/3
FCoE Admin: false
FCoE Oper: true
FCoE FEX AA Configured: false
Fabric interface state:
Po103 - Interface Up. State: Active
Eth2/3 - Interface Up. State: Active
Logs:
11/05/2018 10:50:51.086077: Offlining Module
11/05/2018 11:00:29.772467: Deleting route to FEX
11/05/2018 11:00:29.781181: Module disconnected
*****************************************************************
sh vpc brief
Legend:
(*) - local vPC is down, forwarding via vPC peer-link
vPC domain id : 10
Peer status : peer adjacency formed ok
vPC keep-alive status : peer is alive
Configuration consistency status : success
Per-vlan consistency status : success
Type-2 consistency status : success
vPC role : primary
Number of vPCs configured : 4
Peer Gateway : Enabled
Peer gateway excluded VLANs : -
Dual-active excluded VLANs : -
Graceful Consistency Check : Enabled
Auto-recovery status : Enabled (timeout = 240 seconds)
vPC Peer-link status
---------------------------------------------------------------------
id Port Status Active vlans
-- ---- ------ --------------------------------------------------
1 Po10 up 1
vPC status
----------------------------------------------------------------------------
id Port Status Consistency Reason Active vlans
------ ----------- ------ ----------- -------------------------- -----------
101 Po101 down* success success -
102 Po102 down* success success -
103 Po103 up success success
*****************************************************************
FEX Configuration
fex 101
pinning max-links 1
description "FEX0101"
interface Ethernet2/3
description LEAF_SW1_TO_TOR_SW1_RACK3
switchport mode fex-fabric
fex associate 103
channel-group 103
interface port-channel103
description LEAF_SW1_TO_TOR_SW_RACK3
switchport mode fex-fabric
fex associate 103
vpc 103
