The Cisco Video Mesh deployment Guide provide a section about system capacity, this is a copy\paste from it:
Factors that influence the capacity are the type of devices and clients in a meeting, resolution, quality of network, peak load, deployment, and so on.
This document lists some example scenarios under which the capacity of system was tested.:
- Scenario 1—2 Cisco Webex Teams participants are in a meeting. Both the participants are within the enterprise network, using the same Webex Video Mesh node.
- Scenario 2—Multiple SIP participants are in a meeting. All the participants are placed on the same Video Mesh node.
|
Platform
|
Scenario 1
|
Scenario 2
|
|
Cisco Meeting Server 1000 (CMS 1000) (Full Version)
|
100 (up to 720p)
35 (up to 1080p)
|
75 (up to720p)
38 (up to 1080p)
|
|
MM410v (Full Version)
|
100 (up to 720p)
35 (up to1080p)
|
65 (720p)
28 (1080p)
|
Supposing we are employing MM410v, is it correct below interpretation?
Scanario1
100 (up to 720p) --> this mean can have up to 100 meeting (each made of 2 participants) at 720p?
35 (up to1080p) --> this mean can have up to 35 meeting (each made of 2 participants) at 1080p?
Scenario 2
65 (720p) --> this mean can have one meeting joined by 65 participants at 720p?
28 (1080p) --> this mean can have one meeting joined by 28 participants at 1080?
would be great if someone can help
