12-27-2018 10:40 AM
Hi
I've attempted to upgrade the IOS of 2 of my cat3650's. After rebooting them the one I didn't delete enough files to have room for the new IOS the second I did and it's giving me another error.
First Switch
switch: boot
Not enough free memory for entire image
Not enough free memory for entire image
flash:cat3k_caa-universalk9.16.03.07.SPA.bin: bad/non-bootable Nova bundle file
Error loading "flash:cat3k_caa-universalk9.16.03.07.SPA.bin"
Second switch
switch: boot flash:cat3k_caa-universalk9.16.03.07.SPA.bin
Not enough free memory for entire image
Not enough free memory for entire image
flash:cat3k_caa-universalk9.16.03.07.SPA.bin: bad/non-bootable Nova bundle file
Error loading "flash:cat3k_caa-universalk9.16.03.07.SPA.bin"
If I try and delete a file I get the following error message.
switch: copy flash:packages.conf flash:packages.old
flash:packages.old: read only file system
Here's the dir flash: from the second switch
switch: dir flash:
Directory of flash:/
77441 drwx 4096 .
2 drwx 4096 ..
77442 -rw- 2097152 nvram_config
77443 -rw- 79110340 cat3k_caa-base.SPA.03.03.04SE.pkg
77444 -rw- 6521532 cat3k_caa-drivers.SPA.03.03.04SE.pkg
77445 -rw- 34530288 cat3k_caa-infra.SPA.03.03.04SE.pkg
77449 -rw- 1247 packages.conf
77450 -rw- 537489817 cat3k_caa-universalk9.16.03.07.SPA.bin
821465088 bytes available (826429440 bytes used)
Here's the show boot from both switches
100Wel-SW8#sh boot
---------------------------
Switch 1
---------------------------
Current Boot Variables:
BOOT variable = flash:cat3k_caa-universalk9.16.0;
Boot Variables on next reload:
BOOT variable = flash:packages.conf
Allow Dev Key = yes
Manual Boot = no
Enable Break = no
Any thoughts???
Thanks
John
Solved! Go to Solution.