SNMP Seems to be broken after updating the Firmware to 1.0.02.16 from 10.0.01.20
Before the WAN Bytes in and out MIBs where:
WAN 1
1.3.6.1.2.1.31.1.1.1.6.5
1.3.6.1.2.1.31.1.1.1.10.5
WAN2
1.3.6.1.2.1.31.1.1.1.6.6
1.3.6.1.2.1.31.1.1.1.10.6
These no longer seem to exist after the update.
I found these but they show the same for in and out!
ifInOctets.30 2311274545 Counter32 192.168.0.1:161
ifInOctets.31 0 Counter32 192.168.0.1:161
ifInOctets.32 2350608743 Counter32 192.168.0.1:161
ifInOctets.33 194002918 Counter32 192.168.0.1:161
ifInOctets.34 171552629 Counter32 192.168.0.1:161
ifOutOctets.30 2311274545 Counter32 192.168.0.1:161
ifOutOctets.31 0 Counter32 192.168.0.1:161
ifOutOctets.32 2350608743 Counter32 192.168.0.1:161
ifOutOctets.33 194002918 Counter32 192.168.0.1:161
ifOutOctets.34 171552629 Counter32 192.168.0.1:161
