Hi all;
I have a 7603-S chassi with IOS "c7600s72033-adventerprisek9-mz.153-3.S6" and PKG " c7600-fpd-pkg.153-3.S6"
I bougth 3 card "76-ES+T-4TG" two of them have successfuly come UP and instaled the PKG the therd one didn't
and I recieve the following message when I power on the card:
*Jan 2 23:36:02.167: %PM_SCP-SP-1-LCP_FW_ERR: System resetting module 3 to recover from error: x40g_crashinfo_init: Linecard received system exceptionl
Router#upgrade hw-module slot
*Jan 2 23:36:02.167: %OIR-SP-3-PWRCYCLE: Card in module 3, is being power-cycled Off (Module Reset due to exception or user request)
*Jan 2 23:36:02.223: %C6KPWR-SP-4-DISABLED: power to module in slot 3 set Off (Module Reset due to exception or user request)
bellow a comparision between a good card and the folty one in the same chassi:
Router#show hw-module all fpd
==== ====================== ====== =============================================
H/W Field Programmable Current Min. Required
Slot Card Type Ver. Device: "ID-Name" Version Version
==== ====================== ====== ================== =========== ==============
2 76-ES+T-4TG 1.6 1-ROMMON 1.4 1.4
2-I/O FPGA 0.18 0.18
3-SELENE 0.18 0.18
---------------------- ------ ------------------ ----------- --------------
7600-ES+3CXL 1.4 4-PKT EN FPGA XL 0.8 0.8
11-Kp FPGA XL 1.2 1.2
---------------------- ------ ------------------ ----------- --------------
76-ES+T-4TGQ 1.2 22-40G-ITU_T LinkF 0.6 0.6
---- ---------------------- ------ ------------------ ----------- --------------
3 76-ES+T-4TG <DISABLED> 1.5 ???????????? ?.? ?.?
---------------------- ------ ------------------ ----------- --------------
7600-ES+3CXL<DISABLED> 1.2 ???????????? ?.? ?.?
---------------------- ------ ------------------ ----------- --------------
76-ES+T-4TGQ<DISABLED> 1.2 ???????????? ?.? ?.?
==== ====================== ====== =============================================
***************************
Router#sh module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL SAD094003F1
2 4 7600 ES+T 76-ES+T-4TG SAL1641PRCA
3 4 7600 ES+T 76-ES+T-4TG SAL1616A3UL
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ----- ------------- ------------ -------
1 0011.9202.42cc to 0011.9202.42cf 4.3 8.1(3 15.3(3)S Ok
2 30e4.dbf2.d4a0 to 30e4.dbf2.d4af 1.6 12.2(33r)SRE 15.3(3)S Ok
3 442b.03b6.0790 to 442b.03b6.079f 1.5 12.2(33r)SRD 15.3(3)S PwrDown
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Policy Feature Card 3 WS-F6K-PFC3BXL SAD094202CY 1.6 Ok
1 MSFC3 Daughterboard WS-SUP720 SAD094204F4 2.3 Ok
2 7600 ES+ DFC XL 7600-ES+3CXL SAL1641PFBW 1.4 Ok
2 7600 ES+T 4x10GE XFP ITU 76-ES+T-4TGQ SAL1530KJMT 1.2 Ok
3 7600 ES+ DFC XL 7600-ES+3CXL SAL161285DW 1.2 PwrDown
3 7600 ES+T 4x10GE XFP ITU 76-ES+T-4TGQ SAL1617AYDQ 1.2 PwrDown
Mod Online Diag Status
---- -------------------
1 Pass
2 Pass
3 Not Applicable
can you help please?
regards
