cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

Beginner

Problem in stacking two 9300

Hi to all,

 

i have two 9300 , cross connected with the stacking cables but the stack does not come up.

 

Should i do something prior to stacking in order this to take effect?

T

he only difference i noticed between these two 9300s is tb H/W version.

 

In the first one it is :

 

Switch/Stack Mac Address : 7001.b585.1800 - Local Mac Address
Mac persistency wait time: Indefinite
H/W Current
Switch# Role Mac Address Priority Version State
-------------------------------------------------------------------------------------
*1 Active 7001.b585.1800 1 V01 Ready

 

and in the second one it is :

 

Switch/Stack Mac Address : 7018.a7b1.a880 - Local Mac Address
Mac persistency wait time: Indefinite
H/W Current
Switch# Role Mac Address Priority Version State
-------------------------------------------------------------------------------------
*1 Active 7018.a7b1.a880 1 V02 Ready

 

Apart from the above the software version and switch type is the same:

Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 62 C9300-48P 16.6.5 CAT9K_IOSXE INSTALL

 

 

and in the second one :

 

Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 62 C9300-48P 16.6.5 CAT9K_IOSXE INSTALL


Configuration register is 0x102

 

Any ideas?

 

Thanks,

 

Diiter.

 

 

 

Everyone's tags (1)
Who Me Too'd this topic