04-06-2019 02:14 AM
Hello Guys,
My name is Karl and I'm fairly new to the cisco community. I have an issue and wanted to know if you guys would be able to.
I have a 3 networks and im attempting to configure the serial ports on the routers. I already did the destination ip, subnet and hop address. I thought it was working great but then realized that on my 3rd network, i have int f 0/11 which is responsible for 192.168.50.3 and also int f0/21 which is responsible for 192.168.60.3 and int f0/23 which is responsible for 192.168.50.100 which is a ftp server. I am able to ping all of the devices except those mentioned below.
I forgot to mention that on the 3rd network, i have a trunk on port 24 which gives me more hosts which are the same vlan 50 and 60. Any ideas? I've been at it for days and getting nowhere :/
Solved! Go to Solution.