We expierence the same system reboots on multiple of these switches as described in the bug report.
Affected Hardware:
SG350-52
SG350-52MP
Tested firmware:
2.4.0.94
2.5.0.78
Log entry:
%PSET-F-ILLEGAL_IFINDEX: PSETG_add_port_to_set: Illegal ifIndex 0
***** FATAL ERROR *****
Reporting Task: BRMN.
Software Version: 2.4.5.71 (date Nov 4 2018 time 19:41:09)
ros[0x2e6070]
ros(HOSTG_fatal_error+0x8)[0x2e84d8]
ros(OSSYSG_fatal_error+0x270)[0x887714]
ros[0x69f9e0]
ros(PSETG_add_port_to_set+0x50)[0x7dfa58]
ros(SW2G_tx_to_vlan_subset+0xac)[0xb3bcd0]
ros(NETG_l2_bridge_forward+0x4e0)[0xa4754c]
ros(NETG_l2_snoop_app_gcall+0xa4)[0xa68b90]
ros[0x7bf080]
/lib/libp2linux.so.1(task_run+0xf4)[0xb6e93818]
We have >50 switches from one delivery in operation
Switches affected by these errors have in common that more than two ether-channels are active.
Does somebody have a clue how to solve this?
Just tried to downgrade to 2.3.5.63 ...
