Hi guys,
I bought 2 3560 switches to practice my ccnp switch exam.
However when received those switches and booted them, they were set up with user login details which i don't know of course.
So I tried breaking the boot up to get in to rommon mode so i can make it skip the nvram.
However it is not even letting me do that and proceeds on with with booting.
However i do get an error when loading the IOS, "Error loading "flash:c3560-ipbasek9-mz.122-46.SE/c3560-ipbasek9-mz.122-46.SE.bin"
please see below further:
Boot Sector Filesystem (bs) installed, fsid: 2
Base ethernet MAC Address: 00:23:5d:8a:3c:80
Xmodem file system is available.
The password-recovery mechanism is enabled.
Initializing Flash...
flashfs[0]: 5 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 11774464
flashfs[0]: Bytes available: 4224512
flashfs[0]: flashfs fsck took 9 seconds.
...done Initializing Flash.
done.
Loading "flash:c3560-ipbasek9-mz.122-46.SE/c3560-ipbasek9-mz.122-46.SE.bin"...flash:c3560-ipbasek9-mz.122-46.SE/c3560-ipbasek9-mz.122-46.SE.bin: no such file or directory
Error loading "flash:c3560-ipbasek9-mz.122-46.SE/c3560-ipbasek9-mz.122-46.SE.bin"
Interrupt within 5 seconds to abort boot process.
Loading "flash:/c3560-ipbasek9-mz.122-55.SE6.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Can you please assist?
