cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

Cisco Prime Deploy Image failed

I am running Cisco PI 3.3 and Im trying to deploy "c2960x-universalk9-tar.152-2.E7.tar" to a STACKED switch WS-C2960X-24PS-L running Version 15.2(3r)E1

I am trying to deploy using SCP, TFTP, FTP in that order.

Last Inventory Collection Status is Completed.

I can SSH in to the device. But I dont get why the deployment is failing. The closest clue i get is from "https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvg10748/?rfs=iqvred" witch says use TFTP.

 

Anyone have a workaround?

 

Full log below from Software Image Management Job Result:

 

Distributing image [c2960x-universalk9-tar.152-2.E7.tar] using protocol SCP

failure

The image does not exists on the device continue Distribution Process The image does not exists on the device continue Distribution Process Flash Validation successfully completed.The image does not exists on the device continue Distribution Process Flash Validation successfully completed.Checking if HTTP server is enabled on the device...Http Server is not enabled, will continue with Software Upgrade Operation.Loading Image File to Device : Image copied using Protocol : SCP. Destination file name on storage location and the source file name are different..
Distributing image [c2960x-universalk9-tar.152-2.E7.tar] using protocol TFTP

failure

The image does not exists on the device continue Distribution Process The image does not exists on the device continue Distribution Process Flash Validation successfully completed.The image does not exists on the device continue Distribution Process Flash Validation successfully completed.Checking if HTTP server is enabled on the device...Http Server is not enabled, will continue with Software Upgrade Operation.Loading Image File to Device : Loading image file to flash device is completed. Destination file name on storage location and the source file name are different..
Distributing image [c2960x-universalk9-tar.152-2.E7.tar] using protocol FTP

failure

The image does not exists on the device continue Distribution Process The image does not exists on the device continue Distribution Process Flash Validation successfully completed.The image does not exists on the device continue Distribution Process Flash Validation successfully completed.Checking if HTTP server is enabled on the device...Http Server is not enabled, will continue with Software Upgrade Operation.Loading Image File to Device : Loading image file to flash device is completed. Destination file name on storage location and the source file name are different..

 

Everyone's tags (2)
Who Me Too'd this topic