Hi all,
I need to replace a Cisco MDS 9148 with a new Cisco MDS 9148S. I found the following documentation;
MDS 9000 Chassis Backup, Restoration, and Replacement Configuration Example, which is very good. But I still have a few questions. The Cisco MDS 9148 is running 5.2(8), and that version is not supported on Cisco MDS 9148S. If I copy the running-config from the Cisco MDS 9148 to the new Cisco MDS 9148S that is running a different version (NX-OS 6.x or 8.x) will it cause any issues? Or should I upgrade the Cisco MDS 9148 to the same version as MDS 9148S First? Are there any other points I should be aware of? Any other documentation to look at?
Thank you in advance,
Best Regards,
