cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

Problems with A99-8X100GE-TR and IOS XR 6.5.3

nesttech1
Level 1
Level 1

We are migrating some of these A99-8X100GE-TR modules to the smaller ASR-9904 platform and running A9K-RSP880 and IOS 6.5.3.  When the module installed, some messages come up requiring the FPD upgrade and following the FPD upgrade new errors appear.  Also, many modules have 1 or 2 of the NP processors fail, so after the module is fully booted, it is shoing 6 or 4 of the 100G ports active instead of all 8 ports.  Some outputs are below.

Let me know if there are any suggestions.

Thank you.

==========================================

BEFORE THE FPD UPGRADE

 

RP/0/RSP0/CPU0:ios(admin)#LC/0/1/CPU0:Jan 17 00:28:43.559 UTC: lda_server[65]: %PLATFORM-LDA-3-TIMING_FAILURE : 1588 timing configuration failure : PWM25 PLL in Meldun is unlocked Cannot configure timing. (0x00000016 - Invalid argument)  : pkg/bin/lda_server : (PID=69665) :  -Traceback= b8582dd 10fd9fad 42001a1 4200395 10ac0018 1022eef7 1022ee9d 1022bf4e 4201bb6 4200054

RP/0/RSP0/CPU0:ios(admin)#LC/0/1/CPU0:Jan 17 00:29:49.868 UTC: x86rmon_fpd_agent[395]: %PLATFORM-UPGRADE_FPD-4-DOWN_REV : rommon instance 0 is down-rev (V8.40), upgrade to (V8.47). Use the "upgrade hw-module fpd" CLI in admin mode.

LC/0/1/CPU0:Jan 17 00:30:05.694 UTC: tom_fpd_fpga_agent[356]: %PLATFORM-UPGRADE_FPD-4-DOWN_REV : fpga2 instance 0 is down-rev (V1.76), upgrade to (V1.97). Use the "upgrade hw-module fpd" CLI in admin mode.

LC/0/1/CPU0:Jan 17 00:30:05.701 UTC: tom_fpd_fpga_agent[356]: %PLATFORM-UPGRADE_FPD-4-DOWN_REV : fsbl instance 0 is down-rev (V1.78), upgrade to (V1.103). Use the "upgrade hw-module fpd" CLI in admin mode.

LC/0/1/CPU0:Jan 17 00:30:05.710 UTC: tom_fpd_fpga_agent[356]: %PLATFORM-UPGRADE_FPD-4-DOWN_REV : lnxfw instance 0 is down-rev (V1.78), upgrade to (V1.103). Use the "upgrade hw-module fpd" CLI in admin mode.

LC/0/1/CPU0:Jan 17 00:30:05.719 UTC: tom_fpd_fpga_agent[356]: %PLATFORM-UPGRADE_FPD-4-DOWN_REV : fpga3 instance 1 is down-rev (V1.04), upgrade to (V1.07). Use the "upgrade hw-module fpd" CLI in admin mode.

LC/0/1/CPU0:Jan 17 00:30:05.719 UTC: tom_fpd_fpga_agent[356]: %PLATFORM-UPGRADE_FPD-4-DOWN_REV : fpga3 instance 0 is down-rev (V1.04), upgrade to (V1.07). Use the "upgrade hw-module fpd" CLI in admin mode.

LC/0/1/CPU0:Jan 17 00:30:05.723 UTC: tom_fpd_fpga_agent[356]: %PLATFORM-UPGRADE_FPD-4-DOWN_REV : fpga4 instance 0 is down-rev (V1.06), upgrade to (V1.09). Use the "upgrade hw-module fpd" CLI in admin mode.

 

Starting the upgrade/download of following FPDs:

=========== ==== ======= ======= =========== ========= ====

                                   Current    Upg/Dng

Location    Type Subtype Upg/Dng   Version    Version  Inst

=========== ==== ======= ======= =========== ========= ====

0/1/CPU0    lc   rommon  upg         8.40        8.47    0

0/1/CPU0    lc   fpga2   upg         1.76        1.97    0

0/1/CPU0    lc   fsbl    upg         1.78        1.103   0

0/1/CPU0    lc   lnxfw   upg         1.78        1.103   0

0/1/CPU0    lc   fpga3   upg         1.04        1.07    0

0/1/CPU0    lc   fpga4   upg         1.06        1.09    0

0/1/CPU0    lc   fpga3   upg         1.04        1.07    1

------------------------------------------------------------

FPD upgrade in progress. Max timeout remaining 89 min.

FPD upgrade in progress. Max timeout remaining 88 min.

FPD upgrade in progress. Max timeout remaining 87 min.

FPD upgrade in progress. Max timeout remaining 86 min.

Successfully upgraded    rommon for       A99-8X100GE-TR on location    0/1/CPU0 from  8.40 to  8.47

Successfully upgraded     fpga2 for       A99-8X100GE-TR on location    0/1/CPU0 from  1.76 to  1.97

Successfully upgraded      fsbl for       A99-8X100GE-TR on location    0/1/CPU0 from  1.78 to  1.103

Successfully upgraded     lnxfw for       A99-8X100GE-TR on location    0/1/CPU0 from  1.78 to  1.103

Successfully upgraded     fpga3 for       A99-8X100GE-TR on location    0/1/CPU0 from  1.04 to  1.07

Successfully upgraded     fpga4 for       A99-8X100GE-TR on location    0/1/CPU0 from  1.06 to  1.09

Successfully upgraded     fpga3 for       A99-8X100GE-TR on location    0/1/CPU0 from  1.04 to  1.07

 

AFTER THE FPD UPGRADE

 

RP/0/RSP0/CPU0:ios(admin)#LC/0/0/CPU0:Jan 17 10:13:12.894 UTC: pfm_node_lc[292]: %FABRIC-FIA-1-ASIC_INIT_ERROR : Set|fialc[159811]|0x108a000|ASIC INIT Error detected on FIA instance 0

RP/0/RSP0/CPU0:Jan 17 10:13:34.951 UTC: FABMGR[230]: %PLATFORM-FABMGR-2-FABRIC_INTERNAL_FAULT :  0/0/CPU0 (slot 0) encountered fabric fault. Interfaces are going to be shutdown.

RP/0/RSP0/CPU0:ios(admin)#sh plat

Fri Jan 17 10:16:28.379 UTC

Node            Type                      State            Config State

-----------------------------------------------------------------------------

0/RSP0/CPU0     A9K-RSP880-SE(Active)     IOS XR RUN       PWR,NSHUT,MON

0/RSP1/CPU0     A9K-RSP880-SE(Standby)    IOS XR RUN       PWR,NSHUT,MON

0/FT0/SP        ASR-9904-FAN              READY

0/0/CPU0        A99-8X100GE-TR            IOS XR RUN       PWR,NSHUT,MON

0/PS0/M0/SP     PWR-3KW-AC-V2             READY            PWR,NSHUT,MON

0/PS0/M1/SP     PWR-3KW-AC-V2             READY            PWR,NSHUT,MON

0/PS0/M2/SP     PWR-3KW-AC-V2             READY            PWR,NSHUT,MON

RP/0/RSP0/CPU0:ios(admin)#sh ver

Fri Jan 17 10:16:37.974 UTC

 

Cisco IOS XR Software, Version 6.5.3[Default]

Copyright (c) 2019 by Cisco Systems, Inc.

 

ROM: System Bootstrap, Version 10.65(c) 1994-2014 by Cisco Systems,  Inc.

 

ios uptime is 16 minutes

System image file is "disk0:asr9k-os-mbi-6.5.3/0x100305/mbiasr9k-rsp3.vm"

 

cisco ASR9K Series (Intel 686 F6M14S4) processor with 33554432K bytes of memory.

Intel 686 F6M14S4 processor at 1904MHz, Revision 2.174

ASR 9904 2 Line Card Slot Chassis with V2 AC PEM

 

4 Management Ethernet

1 FastEthernet

8 HundredGigE

8 DWDM controller(s)

375k bytes of non-volatile configuration memory.

6117M bytes of hard disk.

25012208k bytes of disk0: (Sector size 512 bytes).

25012208k bytes of disk1: (Sector size 512 bytes).

 

Configuration register on node 0/RSP0/CPU0 is 0x2102

 

RP/0/RSP0/CPU0:ios(admin)#RP/0/RSP0/CPU0:Jan 17 10:17:44.205 UTC: pfm_node_rp[369]: %PLATFORM-DIAGS-3-PUNT_FABRIC_DATA_PATH_FAILED : Set|online_diag_rsp[229504]|System Punt/Fabric/data Path Test(0x2000004)|failure threshold is 3, (slot, NP) failed: (0/0/CPU0, 0)

 

RP/0/RSP0/CPU0:ios(admin)#sh diagn res loc 0/RSP0/CPU0

Fri Jan 17 10:17:55.765 UTC

 

 

Current bootup diagnostic level for A9K-RSP880-SE 0/RSP0/CPU0: minimal

 

A9K-RSP880-SE 0/RSP0/CPU0:

 

  Overall diagnostic result: MINOR ERROR

  Diagnostic level at card bootup: minimal

 

  Test results: (. = Pass, F = Fail, U = Untested)

 

  1  ) SrspStandbyEobcHeartbeat --------> U

  2  ) SrspActiveEobcHeartbeat ---------> U

  3  ) FabricLoopback ------------------> .

  4  ) PuntFabricDataPath --------------> F

  5  ) CPUCtrlScratchRegister ----------> .

  6  ) DeviceCtrlScratchRegister -------> .

  7  ) ClkCtrlScratchRegister ----------> .

  8  ) FabSwitchIdRegister -------------> .

  9  ) NVRAMScratchRegister ------------> .

 

RP/0/RSP0/CPU0:ios(admin)#RP/0/RSP1/CPU0:Jan 17 10:18:04.554 UTC: pfm_node_rp[369]: %PLATFORM-DIAGS-3-PUNT_FABRIC_DATA_PATH_FAILED : Set|online_diag_rsp[225402]|System Punt/Fabric/data Path Test(0x2000004)|failure threshold is 3, (slot, NP) failed: (0/0/CPU0, 0) (0/0/CPU0, 1) (0/0/CPU0, 2) (0/0/CPU0, 3)

 

Who Me Too'd this topic