Hi,
We are trying to upgrade our 6807 VSS switches to 15.5(1) sy4, we run now on version 15.2(1)SY7.
As far as we know that we cannot run ISSU, thus we tried with an upgrade via changing the boot parameter.
We reboot after changing the boot command and it seems as the upgrading process go through, however we see a warning messages in the log that state :
Jan 16 06:18:58.403: %C6K_PLATFORM-DFC1-2-CRITICAL_FPGA_UPGRADE:
************************ !! UPDATE REQUIRED !! ************************
Critical firmware upgrade available for Module: 1.
Please refer Software release documentation for more information.
******************************************************************
******************************************************************
We followed some instructions that guided us to run two or more commands of upgrading the FPGA as following :
upgrade winters-flash switch switch-number slot slot-number bundled-image
hw-module switch switch-no module module-no reset
Still we couldn't get rid of the warning messaegs, we get the from module 1 and module 2 on both switches.
Any idea ? is this an operation critical message ? we don't want to risk starting upgrading in our production network.
Thank you in advanced !
Regards
