Recently we received a new firmware for the SG300-x that fixed security issues.
see download page: https://software.cisco.com/download/cart?imageguid=B29B7AD6615818752B8DB38FA98FCAE1950BC642&emailclick=CNSemail
I understand that the SG200 is not a routing capable switch and might not use IOS but I am severly concerned there are NO updates for this device since 2014 and I cannot imagine this smart switch is free of issues or security concerns or improvments (TLS 1.2 / TLS 1.3 support for Webserver) etc.
See download page
https://software.cisco.com/download/home/283454003/type/282463182/release/1.0.8.3
As I do not have a service contract I would like to raise this concern here and hope to find answers why the SG 200 series went unpatched.
Not mentioning there are at least interoperational issues (frame / packet fragmentation) when using jumboframes 8k with SG200 and SG300 in the uplink which is sad enough, since Cisco same vendor switching should not giving troubles with jumboframe implementation.
Usecase: Backup, Hyper-V Migrations on Windows 10 Pro.
