12-25-2020 07:33 AM
Hi,
I have multiple vlans in my L3 switch(SG550XG).
Inter VLAN routing works ... ok
I can disable some routing between some vlans with ACL. This is also ok.
But I want to forward some traffic to external firewall for some VLANs.
For example I disabled the access between VLAN 2 and 3 with ACL.
I want to forward the traffic from VLAN 2 to 3 through external firewall.
I tried adding static route, not worked.
I tried to add PBR, not worked.
Probably inter vlan routing overrides, becuse I am using static routes for different purposes.
My last bullet is to disable inter vlan routing and add routes manually which i wont prefer for other conditions.
Is there a way to achieve to this purpose, or do I have to fire my last bullet?
May be i could forward to switch port on which firewal resides, which can be defined as L3 interface, but i didnt try before.
Sorry may be it is so straight forward but I am stuck.
Thank you very much for suggestions by now
Ali
Solved! Go to Solution.