Hello
We have 3 Cisco Nexus 3064 switches in different locations and due to airflow, we need to change the fans.
According to the Cisco website, these are hot swappable, but would you need to swap the PSU's as well?
From the Show environment
Fan:
---------------------------------------------------------------------------
Fan Model Hw Direction Status
---------------------------------------------------------------------------
Fan1(sys_fan1) N3K-C3064-FAN-F 0.0 front-to-back Ok
Fan_in_PS1 N2200-PAC-400W -- front-to-back Ok
Fan_in_PS2 N2200-PAC-400W -- front-to-back Ok
If I need to swap the fan and PSU, would it be advisable to power off the switch down to replace them, or can I swap the PSU and fans while the switch is still live?
Regards
Steve
