Hi,
Got some Cisco 9115 APS that are always presenting this issue:
EWC-AP in Recovery Mode......
Please use 'archive download-sw' to upgrade AP and Controller image.
Please use 'show flexconnect ewc-ap launch-log' to check EWC-AP launch log.
I've tried to upload the image with the following commands:
archive download-sw ewc-ap tftp://10.48.39.50/C9800-AP-iosxe-wlc.bin
But when it arrives at 80% it says:
- Image family not supported with 9800-AP
Got a 9800-L at home and they work fine under it, and also a 9210 that is on EWC.
Now i just want to put the 9115 in EWC, i even isolated this AP in a different switch.
Any ideas how to solve this?
