I would like to know the meaning of each parameter output when the "show interface hardware-mapping" command is executed on the Nexus 9000 series. Especially "Block" and "BlkSrcID"
---------------------------------------------------------
# show interface hardware-mappings
Legends:
SMod - Source Mod. 0 is N/A
Unit - Unit on which port resides. N/A for port channels
HPort - Hardware Port Number or Hardware Trunk Id:
HName - Hardware port name. None means N/A
FPort - Fabric facing port number. 255 means N/A
NPort - Front panel port number
VPort - Virtual Port Number. -1 means N/A
Slice - Slice Number. N/A for BCM systems
SPort - Port Number wrt Slice. N/A for BCM systems
SrcId - Source Id Number. N/A for BCM systems
MacIdx - Mac index. N/A for BCM systems
MacSubPort - Mac sub port. N/A for BCM systems
-------------------------------------------------------------------------------------------------------
Name Ifindex Smod Unit HPort FPort NPort VPort Slice SPort SrcId MacId MacSP VIF Block BlkSrcID
---------------------------------------------------------------------------------------------
