cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

SDWAN cEdge VRRP flapping

HI experts

There is a problem of cedge vrrp,the configuration as below.

Master device:
Current configuration : 255 bytes
!
interface GigabitEthernet4.101
 encapsulation dot1Q 101
 vrf forwarding 1
 ip address 172.16.101.252 255.255.255.0
 ip mtu 1496
 vrrp 1 address-family ipv4
  timers advertise 100
  priority 110
  vrrpv2
  address 172.16.101.254 primary
  exit-vrrp
end

Backup Device:
Current configuration : 240 bytes
!
interface GigabitEthernet4.101
 encapsulation dot1Q 101
 vrf forwarding 1
 ip address 172.16.101.253 255.255.255.0
 ip mtu 1496
 vrrp 1 address-family ipv4
  timers advertise 100
  vrrpv2
  address 172.16.101.254 primary
  exit-vrrp
end

I can see there are lots of logging about vrrp switchover;

*Oct  3 01:34:09.883: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state BACKUP -> MASTER
*Oct  3 01:34:10.217: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state MASTER -> BACKUP
*Oct  3 01:34:21.638: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state BACKUP -> MASTER
*Oct  3 01:34:21.661: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state MASTER -> BACKUP
*Oct  3 01:34:22.033: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state BACKUP -> MASTER
*Oct  3 01:34:22.081: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state MASTER -> BACKUP
*Oct  3 01:35:21.721: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state BACKUP -> MASTER
*Oct  3 01:35:21.758: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state MASTER -> BACKUP
*Oct  3 01:36:21.727: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state BACKUP -> MASTER
*Oct  3 01:36:21.764: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state MASTER -> BACKUP

I also try to issue debug command to check it, but the error log that i feel strange. Could you help me to analysis this issue ? many thanks.

*Oct  3 01:37:21.404: VRRPv4 GigabitEthernet4.101 [1] vrrpv3 chksum 58E4

*Oct  3 01:37:21.406: VRRPv4 GigabitEthernet4.101 [1] vrrpv2 chksum 68ED

*Oct  3 01:37:21.415: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state BACKUP -> MASTER
*Oct  3 01:37:21.443: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state MASTER -> BACKUP
*Oct  3 01:37:21.449: VRRPv4 GigabitEthernet4.101 [1] Notify active address failed: Attibute value already set
*Oct  3 01:37:21.897: VRRPv4 GigabitEthernet4.101 [1] vrrpv3 chksum 58E4

*Oct  3 01:37:21.897: VRRPv4 GigabitEthernet4.101 [1] vrrpv2 chksum 68ED

*Oct  3 01:37:21.898: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state BACKUP -> MASTER
*Oct  3 01:37:21.992: VRRPv4 GigabitEthernet4.101 [1] vrrpv3 chksum 58E4

*Oct  3 01:37:21.993: VRRPv4 GigabitEthernet4.101 [1] vrrpv2 chksum 68ED

*Oct  3 01:37:22.075: VRRPv4 GigabitEthernet4.101 [1] vrrpv3 chksum 58E4

*Oct  3 01:37:22.075: VRRPv4 GigabitEthernet4.101 [1] vrrpv2 chksum 68ED

*Oct  3 01:37:22.158: VRRPv4 GigabitEthernet4.101 [1] vrrpv3 chksum 58E4

*Oct  3 01:37:22.158: VRRPv4 GigabitEthernet4.101 [1] vrrpv2 chksum 68ED

*Oct  3 01:37:22.164: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state MASTER -> BACKUP
*Oct  3 01:37:22.167: VRRPv4 GigabitEthernet4.101 [1] Notify active address failed: Attibute value already set
 
*Oct  3 01:38:21.215: VRRPv4 GigabitEthernet4.101 [1] vrrpv3 chksum 58E4

*Oct  3 01:38:21.216: VRRPv4 GigabitEthernet4.101 [1] vrrpv2 chksum 68ED

*Oct  3 01:38:21.224: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state BACKUP -> MASTER
*Oct  3 01:38:21.248: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state MASTER -> BACKUP
*Oct  3 01:38:21.251: VRRPv4 GigabitEthernet4.101 [1] Notify active address failed: Attibute value already set
*Oct  3 01:38:21.769: VRRPv4 GigabitEthernet4.101 [1] vrrpv3 chksum 58E4

*Oct  3 01:38:21.769: VRRPv4 GigabitEthernet4.101 [1] vrrpv2 chksum 68ED

*Oct  3 01:38:21.770: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state BACKUP -> MASTER
*Oct  3 01:38:21.863: VRRPv4 GigabitEthernet4.101 [1] vrrpv3 chksum 58E4

*Oct  3 01:38:21.864: VRRPv4 GigabitEthernet4.101 [1] vrrpv2 chksum 68ED

*Oct  3 01:38:21.937: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state MASTER -> BACKUP
*Oct  3 01:38:21.940: VRRPv4 GigabitEthernet4.101 [1] Notify active address failed: Attibute value already set
*Oct  3 01:39:21.582: VRRPv4 GigabitEthernet4.101 [1] vrrpv3 chksum 58E4

*Oct  3 01:39:21.583: VRRPv4 GigabitEthernet4.101 [1] vrrpv2 chksum 68ED

*Oct  3 01:39:21.591: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state BACKUP -> MASTER
*Oct  3 01:39:21.614: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state MASTER -> BACKUP
*Oct  3 01:39:21.618: VRRPv4 GigabitEthernet4.101 [1] Notify active address failed: Attibute value already set
*Oct  3 01:39:21.978: VRRPv4 GigabitEthernet4.101 [1] vrrpv3 chksum 58E4

*Oct  3 01:39:21.978: VRRPv4 GigabitEthernet4.101 [1] vrrpv2 chksum 68ED

*Oct  3 01:39:21.980: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state BACKUP -> MASTER
*Oct  3 01:39:21.998: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state MASTER -> BACKUP
*Oct  3 01:39:21.999: VRRPv4 GigabitEthernet4.101 [1] Notify active address failed: Attibute value already set
*Oct  3 01:40:21.434: VRRPv4 GigabitEthernet4.101 [1] vrrpv3 chksum 58E4

*Oct  3 01:40:21.436: VRRPv4 GigabitEthernet4.101 [1] vrrpv2 chksum 68ED

*Oct  3 01:40:21.446: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state BACKUP -> MASTER
*Oct  3 01:40:21.473: %VRRP-6-STATE: GigabitEthernet4.101 IPv4 group 1 state MASTER -> BACKUP
*Oct  3 01:40:21.480: VRRPv4 GigabitEthernet4.101 [1] Notify active address failed: Attibute value already set
 
*Oct  3 01:41:21.331: VRRPv4 GigabitEthernet4.101 [1] vrrpv3 chksum 58E4

*Oct  3 01:41:21.332: VRRPv4 GigabitEthernet4.101 [1] vrrpv2 chksum 68ED
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rps-Cheers | If it solves your problem, please mark as answer. Thanks !
Who Me Too'd this topic