I'm trying to add a Cisco KEM module to a Cisco CP-8851. The device is provisioned to an Asterisk server using the SEP.cnf.xml file. However, even after enabling the KEM module in the SEP.cnf.xml config and connecting the KEM module, the device notifies that "the phone is not set up for the expansion module" and the KEM module remains not powered on. I've tried my best to setup the SEP addon configuration with the minimal documentation that I e
Phone Model: CP-8851 running sip88xx.14-1-1-0001-125 powered by PoE
KEM Model: CP-8800-A-KEM (please see attachments for sample image)
SEP.cnf.xml attachment:
<addOnModules>
<addOnModule idx="1">
<deviceType>cp-8800-a-kem</deviceType>
<deviceLine>14</deviceLine>
</addOnModule>
</addOnModules>
Sample Line sipLine speeddial which should show in the KEM:
<line button="12">
<featureID>2</featureID>
<featureLabel>IT Services</featureLabel>
<speedDialNumber>1234</speedDialNumber>
</line>
