Hi,
I am facing some issues while converting the 9000 NXOS to ACI mode and need some inputs on this.
Version information:
Software
BIOS: version 05.39
NXOS: version 9.3(2)
BIOS compile time: 08/30/2019
NXOS image file is: bootflash:///nxos.9.3.2.bin
NXOS compile time: 11/4/2019 12:00:00 [11/04/2019 22:13:33]
Hardware
cisco Nexus9000 C93360YC-FX2 Chassis
Intel(R) Xeon(R) CPU D-1526 @ 1.80GHz with 24570348 kB of memory.
Processor Board ID FDO24030144
Device name: OCI_Test_SW1
bootflash: 115805708 kB
Kernel uptime is 0 day(s), 0 hour(s), 10 minute(s), 26 second(s)
Last reset at 100480 usecs after Thu Jul 25 19:14:11 2024
Reason: Reset Requested by CLI command reload
System version: 9.3(2)
Service:
plugin
Core Plugin, Ethernet Plugin
Active Package(s):
------------------------------------------------------------------------------------
TEST(config)# no boot nxos
TEST(config)# boot aci bootflash:aci-n9000-dk9.16.0.5h-cs_64.bin
Warning: Please check list of all ACI supported hardware before doing this operation, not all hardware are supported.
Warning: Booting to an ACI image will remove all nxos configuration and format bootflash. Do you want to continue (y/n)?[n] y
Performing image verification and compatibility check, please wait....
Unable remove internal file
Error opening the image /bootflash//aci-n9000-dk9.16.0.5h-cs_64.bin. err = 0x80a3004b
Failed to get image software id. Aborting..
TES(config)#
