cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

serial link interface ( serial and protocol both up) but CTS= down

sravan_235
Beginner
Beginner

Hi all,

can any body help us regarding serial link problem

serial link detals are as follows

Serial0/0/1 is up, line protocol is up

Hardware is GT96K Serial

Description: **** NAGPUR AOB_DC TO MUMBAI COB RIL Link 6 ***

Internet address is 1.1.1.5/30

MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation PPP, LCP Open

Listen: CDPCP

Open: IPCP, loopback not set

Keepalive set (10 sec)

Last input 00:32:20, output 00:00:00, output hang never

Last clearing of "show interface" counters 00:52:04

Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0

Queueing strategy: weighted fair

Output queue: 0/1000/64/0 (size/max total/threshold/drops)

Conversations 0/2/256 (active/max active/max total)

Reserved Conversations 0/0 (allocated/max allocated)

Available Bandwidth 1158 kilobits/sec

5 minute input rate 0 bits/sec, 0 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

1337 packets input, 1509392 bytes, 0 no buffer

Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort

1337 packets output, 1509392 bytes, 0 underruns

0 output errors, 0 collisions, 0 interface resets

0 output buffer failures, 0 output buffers swapped out

0 carrier transitions

DCD=up DSR=up DTR=up RTS=up CTS=down

here in last raw CTS is down === is their any problem with the CTS is showing down....

Who Me Too'd this topic