Routers - Small Business

I have a RV325 router. We have a 10/10 mbps dedicated fiber line, and 6 computer users, as well as several other networked devices. I've applied bandwidth management so that theoretically no one IP can pull more than 1.5 mbps at a time. Generally thi...

I'm installing a RV345 tonight to replace my RV180. I'm attaching a ZIP file of screenshots of all my QoS settings on my RV180. I haven't figured out how to re-create these settings on the RV345 since the QoS interface is different. Can someone assis...

I'll try to keep this short and to the point. At one location I have an RV320 router, a WAP321 and a SG300-28P switch with guest wireless setup (VLAN25 - 10.0.0.x). I set the access rules on the RV320 so that guest wireless users (10.0.0.x) cannot pi...

Eu tinha uma VPN no meu roteador RV042 com conexão de tipo PPTP com meu iPhone. A Apple removeu esta opção do sistema operacional iOS devido a problemas de segurança. Agora, as únicas opções são IKEv2, IPSec e L2TP. Alguém encontrou uma maneira fazer...

How do I setup a VPN provider on my wired RV130 router? I am wanting to secure my home office network communications with VPN. I don't necessarily need to remotely connect. I just want better security. They have provided me with PPTP/L2TP settings: l...

Hello I am in need of some orientation. Up until now I have been working with a Cisco RV042 and two DPC3925 having an IPSec Tunnel with each, in the past I had the trouble of our ISP using private IP addresses in one of the two places with a DPC3925...

Hi all,  Hopefully someone can offer me some assistance, I have a new RV042G for use on a 1Gb fibre connection but I'm unable to get anywhere near the full 1Gb, on the original firmware I was able to get around 130Mbps down, I've upgraded to the lat...

Hello, I am trying to use an RV042G as first router connectiong to my ISP. I use a VDSL2 Modem with PPPOE to get a 100Mbit connection. My ISP requests a special VLAN ID but I cannot configure it in the RV042G. Is this possible or do I need to bypass ...

I have a quick question.  I have two different web servers, one for normal web traffic and FTP acces, the second is for email (webmail and admin interface).  I am currently utilizing an RV180, and port forwarding allows me to send traffic to one IP a...

Network consists of two subnets Network A - 192.168.174.0/255.255.255.0 Network B - 10.142.60.0/255.255.255.0 Network A has a non cisco router connected to ISP with a static IP.   Network B was originally setup with it's own internet connection wit...

I have to rv180 routers I will like to use in two locations several kilometres apart. The routers have public addresses and will like to connect our private network to each other Site A has  Router wan 10.156.1.1 Lan 192.168.1.1 Pc on lan 192.168.1....

At the office, we have a received a RV042 router firmware version 4.2.3.08. We were wondering if we can configure the two wan link as an etherchannel? I don't see anything in the web interface besides the load balancing and the smart-link options. Th...

This error was _not_ present prior to upgrade to current firmware(v.1.0.3.28).  Can anyone confirm that this error is transient or do I need to take action? Full error-log: 2017-06-02 12:01:00 RV130 kern.err SQUASHFS error: Can't find a SQUASHFS supe...

HI all how many FIB size of C3825 have , i check offical link : http://www.cisco.com/c/en/us/products/routers/2800-series-integrated-services-routers-isr/index.html  but i did not find it .  do you guys think how many BGP route can C3825 support is...