Routers - Small Business

I'm using Cisco RV220W.My ISP uses L2TP to provide Internet access. And for some reason L2TP server located behind several switches withing different subnet. I.e.:  My IP address is 10.1.0.33  L2TP server address is: 10.2.0.2Problem that Cisco RV220W...

My rv220w wi-fi is very slow (firmware 1.4.17). About 72.2 mbps. My  notebook wi-fiis 802.11n.  I m very close to rv220w.  What velocity with  new firmware?With auto mode - max velocity is 72.2 (all the laptop).If  i change in manual mode and I set l...

                   Following cisco-sa-20140110-sbd and the possible port 32764/tcp root-access.After downloading the latest published version: RVS4000v2_V2.0.3.2.img and attempting to update the device from an older version I received the following e...

Hi!I have an RV042G inside my network, i.e. behind my firewall/router for a special-purpose subnet. As usual, I manually configure a non-standard time-server. However, as I can see in the firewall logs of my router, the RV042G tries to contact a tim...

Hello,I have a relatively new issue. We have been using the RV042 for over a year with no issues other than no NAT with QuickVPN. Recently we have done some upgrades and are moving the primary Local lan from a 192.168.1.x subnet to a 10.10.13.x.With ...

We have a RV016 load balancing between two broadband WAN connections. On protocols that are sensitive to a change in IP address such as ssh and https, if the client connection goes inactive for a short time (sometimes as short as 10 seconds), the RV0...

Is their anybody out their that can help me with a problem? I have a cisco rv042g router and we just recently install a Microsoft windows SBS 2011 Essentials Server. When i tried to autoconfigure the router it fails to configure it. Is the rv042g rou...

Hello,yesterday I encountered a problem regarding the WRVS4400n - in the morning the network stood still, and as I tried to enter the config page from the router, my password was identified als wrong. Then I tried the standard admin password which wa...

I just went to download QuickVPN for my RV215W, and noticed that on the QuickVPN download page, the RV215W isn't listed.http://www.cisco.com/en/US/prod/routers/quick_vpn.htmlAnyone know which one is the correct version as they are not all the same? T...

Hi Guys :)I've done a portscan and discovered that there are at least three ports open, where i don't think that they shouldn't.8118 -> Privoxy, but delivers the WRVS admin page. So the web-content filtering on the WRVS is done by privoxy, but someon...

Is it possible with the RV180W to have a detailled logging of the http urls requested by its clients?

I have 2 of these business class routers.  One I purchased a few years ago and have it setup for pptp vpn per user.  Its on an older firmware 1.3  I just purchased a second one for another location and also set it up identical and the pptp server jus...

Hi there,I`m configuring a WRVS4400N router to log all internet accesses to a Mac OS Server via syslog.I was able to configure the server to listen to syslog and receive the logs from the router. The problem is the the last digit of the internal IP i...