Routers - Small Business

I am currently running Rv120W with 1.0.4.10.I had multiple issues for which i had opened a ticket - 626369173 : [SRA 08/14]EscEarlier today I got the email that 1.0.5.6 is out which takes care of some of the issues. Since then i am trying to upload t...

I have 2 offices that are connected together through 2 of these VPN routers.  Both routers are online and connected to each other however I am having problems seeing PC's on each network.  For example, from site 1, I can ping the VPN router IP of 192...

I recently purchased a RV082 for a factory to replace the home qualtiy Linksys router that they were overloading. I hooked up the new router and switched it from a gateway to a router. The router gets an IP, gateway and DNS from our ISP(wildblue) and...

Using an RV180W is it possible to add additional DHCP options to the WAN interface. The ISP requires the DHCP Request to contain some additional fields such as Client-id and Class-id ? I've been through the GUI, but can't seem to find anything

iPhone 5S with current IOS 7.0.4 64bit PPTP no longer works with cisco RV042. Looking for solution.

Hi,I have a SRP527-U running 1.2.6 Firmware.I have a supported USB Stick 3G and it's working fine.  I am using the Voice Module of the SRP for Phone services.The problem I face is that Mobile data is quite expensive, therefore I'd like to ensure that...

Hi,I have a SRP527-U running 1.2.6.I have a simple setup, a ADSL connection to the Internet and a bunch of PC's behind that with Internet access.I've setup a host on the same VLAN as the other devices and I've set it up running squid.What I'd like to...

Hello,I have a Cisco RV120W router with 1.0.4.10 firmware.The router drop the internet connections, freeze/timeout in admin interface randomly.How can I determine that this is the router's fault, or if it's the switch / internet access is causing it?...

Since updating our RV180W to the current firmware (1.0.3.10) it has suffered from a major problem. We use scheduled firewall access rules to block internet access for some users (identified by IP address) at certain times of day. Sometimes these rule...

Looking for a SOHO device that could accomplish not only to connect people from home to Internet, but also to let me remotely access my work stuff (from my home office), RV180W sounded great and really cost effective. I could connect to Internet, FRO...

Hi all,I am trying to build VPN that connects one place with the other network. Source network uses public IP address, that is the only address from which the resources behind the RV042 router (on destination network) are acessible.I have set up Clie...

Hi!Is there any chance to add support for ZTE MF195 3G modem in the next F/W update?More information: http://www.ztedevices.com/support/data_card/7ce20510-6b59-431f-8cfc-f07f2fba6a1f.html?type=softwareThanks,Gabor Kovats-Szocs

My company purchased one Cisco RV180W wireless router few days ago and it worked normal with default firmware version of 1.0.0.30. Today I upgraded the firmware to version 1.0.3.10, the users can still access this router via wired and wireless device...

Is there documentation on setting the RV042G to Router Mode and what that changes to it's topography?  The manual simply tells us to click the button to change the mode?!?!? A 4th grader could figure that out - but what does it do to the unit?  Does ...

Just bought a router RV042G for commpany. Why does the router configuration requires two IP addresses for the two ISPs. What if we only have one ISP?How should i corectly configure router for one ISP (internet provider)Plese need ugent help!