Routers - Small Business

Hello, after succesfully update to version 1.0.5.6, I have errors in my log.I made a factory reset after update and manualy set everything.I have cable internet connection, DHCP server in Cisco, use wifi and I have a few firewall and forwarding rules...

Hi Experts,I have a tough one.  I have installed QuickVPN on a few systems now for an office I administer and have had relatively few issues.  I have a tough one now though.  I installed QuickVPN 1.4.1.2 on a Windows 7 system.  The connection with th...

Hey Guys, I just set up a new Linksys/Cisco RV082 router with the intent to get VPN working from outside the building. I have gone through the setup and while everything looks good, I have not been able to connect yet. I have tried everything that I...

Hi, Newly purchased and installed RV082, static IP address at server co-location site, can access from remote office and home via web and PPTP no problems.Setup VPN Client access userid and password, made active, exported client certificate and save...

i have a 2 internal computersA: 192.168.1.10B: 192.168.1.11isp provide 2 ip, x.x.x.110-111subnet: 224gateway: x.x.x.97router:WAN 1: x.x.x.110WAN 2: x.x.x.111i try to setup followingcomputer A port 80, 21, 3389, 10000 map to WAN 1computer B port 80, 3...

Here’s what I’m trying to do:I have one VLAN on a HP 1810 24 port switch (latest firmware) that supports VLANs. On this VLAN I have 2 DHCP servers running on W2k12. This DHCP server has two scopes: 192.168.1.x and 192.168.2.x. The default gateway to ...

Good morning-I may be putting the cart before the horse, but here goes.I setup my first Cisco VPN Router today, an RV110W, for a friend's small business. All the basic network functions work well, as they should.However, I cannot get the VPN to work....

                   We have a RV180 V01 that has been updated to 1.0.3.10 firmware. When we try to modify the IPv4 settings the router displays"Please wait...The page is being loaded" and never gets to the settings menu.The reason we updated the firmw...

Hello!Need some help with this situation.Have one RV042 configured like ahead:2 WAN links in Smart Link backup mode (WAN1 Primary)WAN1 - Cable modemWAN2 - DSL routerNetwork service DetectionRemote host: 8.8.8.8Dns Lookup host: www.google.comWhen i po...

Hi,I have set up a site to site VPN between a WRV4400 and a SA520.The VPN is up but no traffic is passing inside. From each side, i can ping the remote gateway but i can't ping the remote network, i get "Request timed out".The SA520 is functionnal be...

The model of Cisco SRP527 Router that we currently use and resell the most has an end of lifehttp://www.cisco.com/en/US/prod/collateral/routers/ps10907/ps10500/end_of_life_notice_c51-728170.htmlWhat is more concerning is that there will be no replace...

Along with wireless problems that have already been documented about this device I am having problems with port forwarding where it will lose all its settings after losing its power.  I then try to go into the management for port forwarding and am no...

I live in Australia and I'm trying to enable daylight savings time. For this year, DST runs from 6 October 201 to 6 April 2014. However, the web age expects the from month to be lower than the to month. I could set it up to have "normal" time 11 hour...