Routers - Small Business

Hi All,Im in the process of replacing a setup of older Cisco PIX firewalls for a small retail chain with four RV320s, one at each location.My questions are simple but I just want to double check a few things:One site is the corporate office where we ...

Hi All,Currently looking at upgrading our 10mb leased line to 30mb. We currently have a a Cisco 1800 series which Cisco's technical manual says supports up to 40mb throughput, however our ISP are saying we should upgrade to a Cisco 1921 to support th...

I had an existing RV042 to RV042 Gateway to Gateway VPN working successfully.  The modem failed at one of the locations and it was replaced by a Comcast X-finity Gateway/Router.  Unfortunately, I have no choice on this device.  I am trying to get the...

                Hi guys,we have Cisco RV016 VPN Router configured with local subnet of 10.10.10.0/24 and one Static IP 117.218.xxx.xxx.for Local Gateway which is connected in WAN1 interface of RV016 Router. I have created the VPN tunnel in client to ...

Hello all,I have a RV180 router that is not showing up in a traceroute. I have multiple VLANs configured where the clients are on one VLAN and the servers are on another. Inter-VLAN routing is enabled and I can ping back and forth and everything work...

Hi,I have been tasked to create a Voip system using Cisco UC320 to serve one main and one auxiliary office. I think there is no way to use the UC320 as a VOIP gateway on multiple subnets so  I need to create contiguous IP space between the two branch...

Hi,I have an issue with an RV042V3. It does not connect to my ISP with PPTP connection type and username 'comsulting/net@mmc.at' , pwd 6 digit alphanumeric.Using the RVS4000 or the old RV082V2 with firmware 2.0.2.01-tm, the WAN PPTP connection works ...

I have created a connection gateway-to-gateway between RV220W and RVL200, is doing without any problems.For example, I can ping the gateway on the other side. But when I connect trough RV220W QuickVPN (or PPTP) I can not reach the gateway (RVL200) or...

Is there anyone who can help me figure out why this might be happening?  If it means my router is bad so be it but I am trying to figure out why it connects wirelessly, then after a few minutes it drops outside internet capability but you are still c...

                   We have an RV120W which works fine for all our Windows users. Lately several employees have begun to bring in their personal MacIntosh laptops and are experiencing difficulties connecting via the wifi. They either see no wireless n...

Hello,I got a RV180 (firmware version: 1.0.1.9) and I am bit surprised by the lack of the configuration flexibility...I am trying to use Wake-On-Lan (from internet) to wake up a machine in my home (trying to be green and not keep the machine on all t...

Hi!,how do I connect the RV042 with an Windows VPN Server, so that the PC's behind the RV042 get the external IP of the VPN and join the VPN-Server's Network.I did configure the Windows Server with this tutorial: http://blog.lan-tech.ca/2012/01/28/sb...

From what I understand the RV220W is documented as having 16 VPN Connections.I have 10 up and running without issue.When I try to add the 11th, I can add the Policy, but the corresponding IKE policy is not visable or editable after it is added.I've d...

I have a VPN set up between two sites. Each site has an RV120W router, connected to the internet through a broadband modem, so the setup looks like this:Site 1 Internal Network <---> RV120W  <--->  BT Openreach Modem  <--->  Internet  <--->  BT Openr...