Routers - Small Business

Hello allWe have several RV042 routers with older firmware version 1.3.12.19-tm.We have purchased new RV042 routers as hot spare replacement that's coming with firmware version 4.1 installed.We have a VPN tunnels between multiple sites using the olde...

Hi ,I would like to set up a site to site VNP connection between 2 RV120W routers, preferably via IPsec.The problem is that I would like/have to use a 4G modem router (model TINY) which connects to internet in front of the RV120W (on the local side)I...

Hi All,I'm looking for a device which will allow me to forward all internet bound traffic through a L2L IPSec tunnel from branches to a central hub and internet conneciton.I've recently purchased a RV120W(as a test branch device) which i've tried to ...

Does anybody know default login/pass of cisco rv120w for ssh access ?

Hi All,We have a RV082 Router and we are trying to do port translation.For example:88.123.2.5:80>192.168.1.10:233488.123.2.5:81>192.168.1.10:2335However this does not seem to be possible as I can only choose the source port and the destination IP add...

How do I get one of these to automatically bring up the VPN tunnel without the end user having to login and click connect?  I got the VPN working Dynamic to ASA static, but it doesnt come up on its own when I try to access something over VPN.

Hello.  I want to setup a VPN client for my ubuntu netbook.  I have had no problem using the client for Windows but I see no client for Linux in the downloads section.Or if someone has an alternative client or means of connecting an ubuntu box over a...

Hi, RVS4000 has default firewall rule from ANY WAN -> to ANY LAN with status Allowed. Should that be denied by default, like in RV042 or RVL200?

We require UPnP (mainly for an in-house built FTP Server app that uses UPnP to dynamically open/close ports for Passive FTP mode) and have found it's implementation in the SA540 is unreliable.  Sometimes UPnP works after a reboot, sometimes it doesn'...

I have 25 of these routers installed behind various providers and transport (DSL, Cable, UVerse).At sites where I have static IP, I can't reach any service inside, and in fact can't even reach the router for Remote Management.At all times the users i...

I purchased a RVS4000 router CSCO but I can not connect to myISP ... interface down ... with the old USR PPoA use but there is onlyon new cisco PPPoE.No IP address is assigned by my ISP. My ISP is AliceadslThanks for your cooperationCosimo Portulanoh...

Hi,I am using an SRP 527w to provide a VPN connection from a remote site office back to the head office for a number of company users.Also in the same site office we have a number of guest users, who require Internet only access and a shared copier a...

Hi, Hopefully someone can offer some advice.I've just got the RV220W and navigating through the menu's I found the Transmit Power value in the wireless settings.I live in a house that has walls 4-5ft thick solid stone so obviously there are some blac...

Just as I asked, does Cisco make a RELIABLE small business router?  Common features required would be single or dual WAN, VLAN support (at least 4), multiple SSIDs, some measure of inter-VLAN routing (such as a shared printer in an office) and firewa...

Hello Everyone,I've been pouring through the forums in the hope of solving a problem that probably stems from my lack of knowledge! - please help if you can I have purchased 2 x RV220W routers and want to setup a very basic gateway-gateway network th...