Routers - Small Business

Hi,i am using RV082 V3 Router.  i am using Class A IP address on LAN, the router is getting hanged.when i checked the reviews it says that it will only support Class C IP Address on LAN.  because of this the router is getting hanged?please reply.

Hey all,We have recently purchased an RV082 router for our company.I have successfully managed to establish a VPN connection through PPTP and through QuickVPN (IPSEC?)When i am connected through PPTP my software SIP client has 0.5% packet loss which ...

Hi, I am a employed at a credit union with 17 branches. We have a mpls circuit connecting the branches to our main office. I setup DSL as a backup connection. I have 17 RV042 Cisco VPN Routers. I created a secure vpn tunnel for every branch to the ma...

Hello.  I have a WRVS4400N and it has been working well for some time now and I did not make any changes before this issue.  Although everything is working with the router, it will not allow me access to www.srdofny.com any more.  We have had access ...

i have 2  router connected via vpn. 1 rv082 and 2 rv042theyconnect fine.and i can ping various pc's and servers from various pcs back and forth without problem.the problem i am having is i cant access any files or network resources across the vpn.i h...

Hi, I need some advice on the best way to set up a UC320W with an SRP547W router.I have the SRP547W successfully connected to the ADSL connection, with ethernet and WLAN from the SRP457 working correctly. The SRP457 is setup as the DHCP server.The SR...

I got an WRVS4400N router and some clients they use the QuickVPN client.I had the firewall set a DMZ to the router and the router set the firewall off and Block Wan request set off.The clients now can make a VPN connection to the router and works fin...

There are a few discussions on this topic but nothing I can find indicated definativley shows that this can be done with this model.I have an ADSL service that came with 1 IP address and then we later purchased an additional 4 IPs (2 usable) for the ...

Hey guys,Can anyone answer if the following setup is supported on the RV120W or the RV220W.I would like to have two VLAN's (on wireless and lan), one for VPN traffic and one for public traffic.VPN Traffic:VPN client on the router to connect to the ma...

I am hoping someone might have an idea on this as I am stumped.  When clients connect wirelessly to the WRVS4400N they successfully get a DHCP address from the Windows 2008 server.  After they have the address they can no longer access the server.  I...

HiI have an RV082 for use in our office. I wanted to create a public acess point on a different subnet/vlan and so configured port 8 of the RV08 as VLAN2. When I plug a laptop into this port it immediataley gets an IP address from the DHCP server on ...

Buenos Dias Compañeros. Tengo el siguiente problema: Tengo tres sedes fisicas las cuales estan conectada de la siguiente manera: En la sede principal tengo un RV-042, la cual esta conectada con otra sede A, la cual tambien tiene un RV-042 y estan con...

I am not sure why they changed the VLAN configuration page, or if anyone else cares. But I would like to request that it is either changed back, or the ability to decide which vlans use which ports is added, rather than the current tagged, and untagg...