Routers - Small Business

After upgrading the firmware on my RV042 router to version 1.3.13.02-tm, I am experiencing very slow Internet response on most sites.  In some instances, when the page does load, it lacks many graphics.  Frequently, I also receive a "server not found...

I Have a Cisco small business pro, srp 527w  With a usb sierra aircard 312u can they be configured to dial out ??I have Avermedia security camaras and the software has the option to dial out or send an sms if movement is detectied can the above hardw...

We need help with our newly purchased Cisco Small Business RV082 10/100 8-Port VPN Router. After accessing the Router's Web-based Utlity and after entering the default username(admin) and password(admin), we are unable to configure the said router du...

Can anyone help with this? we found when client's use our game servers the router ips reports DDOS_TYPE_UDP_FLOOD here some of what we are seeing and some time our own lan ip sometime show's up in the list we host gaming servers and teamspeaks server...

Hello, I am trying to block a certain domain, i used "domain" and "domain.com" in the forbidden domains , but when people access the website as https://domain.com the website loads perfectly. Http is blocked however.I tried to block "https://domain.c...

Hi!I have an RV110W which has repeatedly presented the following symptoms.I  set it up as a DHCP server for its LAN ports. One of the LAN ports is  connected to an SF302-08P switch. I then have a few hosts on the switch.  I also enable the RV110W's W...

This type of issue has been posted time and time again by others.  In this particular instance the ability to deny and allow access based on a time and day for one or more MAC id or IP address or range of addresses does not work.  Because the code is...

Hi,I am using RV042 router.WAN IP: x.x.x.90/30LAN IP: X.X.X.216/29 (GIVEN BY SERVICE PROVIDER)pRIVATE ip: 192.168.1.0/24i need access private IP from WAN by using RDP.When i was tried via  x.x.x.218 its not reached.i also configured one 2 one NAT . B...

I'm trying to find a reference for how many IPSEC tunnels the WRVS4400N can passthrough.  Can anybody help me find such a document?

I have a new RVN220w that I am trying to get setup.  I need to have a vpn connection working through the device but after a short period anywhere from a couple of minutes to an hour the device will stop responding to pings on the wan side and the vpn...

I'm using a WRVS4400N and have all the proper ports open as well as the corresponding ones in the windows firewall. I've tested this with multiple port checkers online, such as grc.com. I've even go so far as to put one computer on a dmz and turn off...

Hi !I'm trying to isolate a web server on my LAN, using a RV082 router.I want the web server to be accessed from the Internet, butnot  other PCs on my LAN .It seems that setting up a DMZ is the best way to do this.But  we only have 1 static IP provid...

Dear All ,I tried the "Advanced Routing" Feature over the RV-042 V3 Dual WAN VPN Router , And the New IP Subnet i added ( 10.0.7.0 ) in the Static Routing Table does NOT Appear in the Routing Table of the Router. Please review the attached Print Scre...

HalloIch habe einen WRVS4400N Router. Vom Internetprovider habe ich eine Bandbreite von 50'000 kbit/s Downstream und 5'000 kbit/s Upstream. Jetzt habe ich das Problem, dass ich nach dem Router nur eine Bandbreite von ca. 25'000 kbit/s erhalte. Vor de...

Hi All...We're having problems connecting via VPN with Windows 7 and PPTP. On one machine - 32 bit - it connects sometimes, sometimes not. On two other machines - 64 bit - we've not been able to connect at all. We've taken all of the defaults when se...