Routers - Small Business

Hello everyone, I have been trying for about a week to get open nat on my three xbox 360's I have in my home. Things came to a head last week when the gaming group and I tried to play over xbox live, but our games kept disconnecting. When I checked m...

Greetings All,I set up a CentOS 4.3 server under VMware 1.6. It servers up web pages and has a few other functions. It is at IP 192.168.1.90 on my LAN and I can ping this server from any machine on the LAN.I had an extra machine so I installed the Sm...

Hello, I am attempting to connect DSL service from Windstream through 2 Actiontec GT701D MODEMs in bridge mode to the RV042 router. First I have connected the modem and signed into my ISP via PPPOe and Internet service is established. Next, I reset t...

Hello!I'm not sure if I'm asking this question in the right zone, but still:We have 24+ Cisco Linksys SPA 502/504G IP-Phones.Now I'm looking for a 48-port full PoE Switch. I found an insteresting model: Linksys SFE2010PWill it be enough to give PoE P...

HelloIs anyone successfully using the RV220W and a Suresignal? I cannot get the two working together. I recently upgraded to an FTTC/VDSL2 serivce and splashed out on the RV220W, unfortunately since then I cannot get my Suresignal to work. Today I r...

I have an RVS4000 router and it worked well with AT&T's DSL service. I installed it, with my limited knowledge, with no problems. I switched my internet service to Logix and the RVS4000 will not see the Logix signal (the internet LED does not light u...

Question about VPN on RV082i connect like diagramwhen i use shrewsoft for vpn ipsec i can not connect across rv082 to next hop on wan 1 but when i use PPTP on windows 7 for vpn PPTP i can connect across rv082 but high latency on this connection pleas...

So I already discovered, by reading in these forums, the DHCP bleed issue with VLANs on the 4400n's.  So I thought, no problem, I'll just use the 4400n to provide DHCP to my two VLANs and then a new problem cropped up.  I am unable to add a default r...

I have a rev3 RV042 that I am trying to get working with the Mac VPN client and the PPTP server.It won't connect.  It starts, tries to authenticate and then disconnects.The router came with Firmware 4.0.0.07.  I have upgraded it to 4.1.0.02.  I have ...

HI all, I recently was looking into why we had some issues with the internet connection and I stumbled upon the abnormal amount of BAD_TCP_FLAG entries. Previously, I did not know what device was causing this but today the IP that was causing this ch...

Hi!Does the Cisco SB RVS4000 router support 802.1x authentication for the WAN port?Thanks in advance!John P.

Hello.  Recommended a WRVS4400N router for a client of mine due to its multiple SSID and VLAN support, but I'm unable to make it do what I thought would be very easy.  I wonder if anyone can shed any light on the error of my ways.Here's the story (na...

Hi Team,Would you be able to advise if the latest batch of RV042 are version 3. When does the version 3 start shipping from Cisco for users in Malaysia?http://www.smallnetbuilder.com/images/stories/lansrouters/cisco_rv016_082_v3/cisco_rv016v3_serial_...

     I am looking for a solution to connect to a Wi-Fi that is provided for a customer I have. He has free Wi-Fi for his Condo, but must use log-in credintials each time to access the Internet. I need to get his home automation equipment on the inter...