Routers - Small Business

I use a router RV082 with load balancing. My problem is when I try to access a specific site, I get the error message that my IP address changes and I can not use 2 ip address. I want to specify an ip range to always use the same WAN port. Can you he...

Hello:I just purchased 5 RV220W to act as internet/wireless router at a remote site. There is no VPN, just LAN and Wireless routing to the internet.I have setup remote management and it works fine when I am directly connected to the internet. However...

Gentlemen, I have a gigabit internet connection and I need to purchase a new Router to support both CLI and web base as well as IDS and …. Something decent and dependable, I am doing some research in this and it would be appreciated if someone can ha...

I defined a static route: 192.168.0.0 / 255.255.255.0 / 192.168.1.201 (gateway), I can connect from 192.168.1.0 to 192.168.0.0 but we cannot ping in this local network. We have a CISCO 18000 as a VPN IP configured between this two local network. Some...

Is there any good description how to configure Linksys RV016  for two WANs (cable+DSL)? It looks like switching between those two  connections not splitting what is set for WAN1 and what is set for WAN2.I set load balancing as- WAN1 (cable) all HTTP ...

Has anyone figured the latency issues with RV120W routers? I read an old post with replies of testing the connection with I-perf or J-perf. Those are both great tools for testing, but I believe you can tell alot from a ping, and I should not have res...

Hallo,we are using a WRVS4400N v2.0 with the latest Firmware 2.0.2.1 and the newest QuickVPN Client 1.4.2.1. And also testet 1.3.0.3 which was on the Cisco CD-ROM. The Problem is as following:We have two branch offices where 1-2 clients are connectin...

Do Cisco recommend me running the latest firmware update? Im just an individual who uses it for like a small web-/FTP-/Mail-server, etc...What are the recommodations? Personally I would have updated to the latest...but what are actually the Cisco rec...

Example.  Range start: 192.168.1.100 range end: 192.168.1.149  NAT to 172.24.13.152/29Gracias!!!

So have a RV042 VPN router that is directly connected to the ethernet port of our comcast cable modem.If I connect to it using QuickVPN (1.4.2.1) from a PC that is connected using AT&T 3G Network it works fine!If I connect to it using QuickVPN (1.4.2...

HiOn RV016 router WAN port 1 is showing Half duplex wen i check it in Port setup but when i check it on Port status its showing me as Half duplex, how can weforce it to make it full duplex.

I have an RVS4000 with FTP download issues.  I have the latest v1.3.3.5 software and the latest ISP (1.5).  Regardless of any settings changes, my FTP downloads always timeout.  I have tried a new basic router and had no issues, so it is not the PC, ...

I currently own a WRVS4400N v2.  It is currently meeting my needs except for the lack of SSL VPN.  That's really not the topic of this discussion though.  What I am most interested in is if the newer RV220W is more secure?  I know it lacks the built-...

Is there any timeframe on an update for the RV220W firmware? I have had to take mine out of production due to it freezing up/locking up under medium loads. DNS queries (dig) don't respond, pings outside of the network don't respond. Pings to the rout...

I have just recently purchased the RVS4000 V2 Router and I am trying to setup VPN access. On the router end, I have assigned (access)  usernames/passwords for remote users, and on the remote users laptops they are running QuickVPN Version 1.4.2.1. Th...