Routers - Small Business

The USB modem ZTE MF636 that is in the compatibility matrix document for SRP 500 series is no longer available in Australia. The new MF636i supplied by Telstra is not recognised by the router.Any idea how to make it recognised or when new firmware wi...

Dear All,I need your help in setting up site to site vpn between two office.Both office are using SR 520 with NAT enabled. Appreciate your help and any documents in seeting up the same?Regards,Prashanth

How to monitor cpu and memory utilization of rv and sa series becuase i want to know maximum load capcity of user and link ? please advise for this solution. I try to use mib from cisco web but not have oid of cpu and memory Many thank

Hi, is it possible to list 2 or more remote networks (subnets)  that I want to let VPN users have access to?   At present, the only choices are "IP Address", "Subnet" or "IP Range".   I have it set right now for subnet - a /24, but we've recently sta...

Hi all,out of the box the 887 was on IOS 12.4 which i thought had eigrp built into it btu didnt think about itso i used the feature navigator to get the right IOS which i then downloaded and installed 151-4Mto which when i type router ? i only get od...

How do I configure a Cisco RV042 to work with Quick VPN? I have a modem with internet working properly on static IP/routed bridge setup connected to the Cisco router. No guides that I've followed have made progress. I'm slightly frustrated.What do yo...

For some reason, RV042 does not answer all SSDP broadcast search queries. I have tried to analyse this problem from linux using upnp-inspector and by capturing the UDP traffic to/from port 1900 with wireshark (udp.port == 1900). Attached is the captu...

Does the CISCO SRP Routers Support a Remote Access VPN?I see the support Site-Site but can't see if they support Remote Access?...

Hello,I bought a SRP526W yesterday and tried to get it going with a T-Online Account. I configured a PPPoE Connection:DSL Modulation : ADSL2+Multiplexing: LLCQos: UBRVPI/VCI: AutoUserName: *******@t-online.dePassword : ***************Service Name: ‚‘...

Hi AllWe have a Small Business RV042 router, and have many Internet servers in our Internal and DMZ networks behind the router.In our old GTA firewall, we were able to add IP aliases to our external (WAN) interface.   That is, our WAN interface can h...

how do you configure a wrv200 wireless g vpn router to use a radius server for authentication?

Hi all please help me I have WRVS4400N V2 FW Version:V2.0.2.1in gateway mod with one public addressAnd a lots of questions : For what is necessary VLAN interrouting ? At which nivel is routing ? if at the IP nivel ?ACL :I have an architecture like th...

Hello, first time Cisco user here.I just purchased an RVS4000 and would like to know (if I can and how to setup) this as a VPN device solely, or do I have to put it in front of my existing router/gateway (with proper port forwarding, of course).  I'm...

Last day I bought this router but i have a problem. I create a vpn user then i generate certificate, export client certificate and copy to the remote PC in the directory C:\Program Files\Cisco Small Business\QuickVPN Client. When I try to connect, Qu...