Routers - Small Business

I've got a brand new RVS 4000-V2 router (firmware: Release 2.0.0.3)Can't get a connection to my ISP using  "Internet Connection Type" PPPoE.   The connection works fine with any other router.MTU size is set to "auto".Logfile says:Plugin pppoe loadedP...

Hi, I have connected a Nortel PBX with CISCO RouterConnectivity Setup==>Nortel PBX(rls5.5)-----E1 connection----->CISCO Router--------------->CISCO Router(FXS Port)--- Analog Tel SetWhen a ext at PBX dials analog tel set or analog set dials extenion ...

after verifying network, i get remote gateway not responding.  do you want to continue?i have searched the forum and tried their fix but no luck for me.my setup:rv042 wan static ip 10.21.99.200 255.255.255.0dhcp onfirewall offtried both gateway/route...

I have an office peer-to-peer network (win 7) connected with a QNAP NAS and a RV082 router. There is no proper naming (I don't know how to implement it) so everything is access via IP.I managed to configure my RV082 to accept VPN connection from home...

I have a very strange issue.  I have always been able to get Macs/iPhone/iPad with OS 10.4+-iOS3+ to connect to the PPTP server on the RV042,but just got a new RV042 the other day with 4.0.0.7 firmware and I can no longer connect with the Macs or the...

i am getting hundreds of system log errors a day "connection refused- policy violation"  TCP 84.51,XXX,XXX:50985---208.99.XXX.XXX:62348 ON IXP3 This is blocking some of the devices on the lan from communicating with servers on the web etc. i need the...

I was just on the verge of ordering a WRVS440N small business router when I noticed that it does NOT seem to have a remote / timed power management feature / facility?This is desired to save on equipment wear / power usage.Can anyone confirm this and...

Hi all, Can I stop the torrent traffic with SR520-FE-K9?Sent from Cisco Technical Support iPhone App

Dear,well, how are the syntax of 'Block Forbidden Domains'?With dot (.cc) or without dot?Best RegardsTorsten

Hi All,I am trying to configure a SA 520 device.Hi all, I am trying to configure an SA520 for WAN access,but i noticed the  config i applied on the WAN does not appear on the WAN status page.It only tells me the Link Status is up meaning i inserted a...

I am setting up a Cisco RV 120W with DynDNS to the Actiontec in my home to access network shared drives and network cameras 192.168.20.xxx1) I have activated the DynDNS to the Actiontec. Do i also need to activate the DynDNS on the VPN?2) I have my A...

I have a question about the number of port forwards allowed on the WRVS4400N.  The gui allows you to have up to 15 seperate forwards, I have a client or two that need a few more.  I've noticed that when I backup the routers config, it's in plain text...

Hi,I have a client that we are troubleshooting and issue with SSH and FTP sessions dropping out.  I have disabled the SPI Firewall during our debugging, however when we set SPI to disabled, the client looses all internet connectivty from the internal...

Hi techs,Normaly we use the cisco 877, but for the SMB segment we are now using the SRP527.Authentication on both pvc's seem to work fine, but i seem to be stuck on the wan/vlans.due to the problem that they get the same ip address. Also it seems tha...