Routers - Small Business

We have a 20-user office that needs a VPN firewall/router with NAT to access the Internet from their PC's and all 20 would like to work from home in the event of a snow storm. We have a T1 with a Ubigate iBG1000 from Covad that this would sit behind....

Hello,I'm wondering if there is a maximum number of port forwarding rule in the RVS4000.I can't find this information in the specs.Thanks in advance.

I have a 10/100 4-port VPN Router through which our 4 telephone lines are connected via Cisco 7960 IP phones.  Within the last two months all of our calls seem to get garbled.  When on the phone, other people can hear us but to us they sound garbled/...

Just bought a RVS4000 v2. Firmware v2.0.0.0.3. All worked fine when using factory default settings. But I bought this because I wanted to implement VLANs. I defined VLAN2 for the VOIP phones connected through a switch to Port 1. I also defined VLAN3 ...

So apparently QuickVPN is not available for Mac OS X, scuttling what is otherwise a great product for a mixed-platform small business.Can I ask someone from Cisco to advise on whether a Mac OS version of QuickVPN is planned?If not, then can someone f...

I'm a small business and one man band - little knowledge is a dangerous thing - but I'm my only option.Have a DSL Zoom modem coming in to a LS RV016 router - router goes to GB Ethernet switch which is connected to a G5 Mac Server.Mac Sever and severa...

I have an RSV4000 which I'm using as a gateway. I changed the default 192.168.1.0/24 network to 10.255.255.0/24 and configured the DHCP address pool to use 64 host addresses starting at 10.255.255.64Every so often users on VLAN 1 get a gateway IP add...

I set up our VPN client and traveled abroad.I am now  trying to access my business/home network. The VPN client connects  without problems. But when I try to access local IP addresses (through a  web interface), I do not get a response.I can ping the...

I have 4 Linksys RV042 routers that form a VPN  hub and 3 spokes.  Each of the 3 remote RV042s have a single gateway-gateway VPN tunnel configured to my central site..  I just acquired a new Cisco RV042 router (firmware 4.0.0.07) and configured it as...

Hello!I have strange issues with my RV 120W, which I bought after the recommendations from a Cisco/Linksys pre-sales support. I'm using this unit for SOHO environment with two clients (computers) connected and a few mobile clients. Nothing special an...

We have a RVS4000 and it is dropping one of the VPN tunnels over the evening.   In researching this, we have found that the endpoint vpn is always showing "KEY LIFETIME" that is not what we have typed in on the RVS4000 edit screen.  Example 28800 and...

my router is breaking connection once in a few minute , why?and where to find firmware update????

I've just bought a Cisco SB RVS4000 Gigabit Security Router and enabled bandwidth management to reduce the upload and download bandwidth for a local IP addresses.  The bandwidth rate control works fine for normal web browsing and I get the expected r...

Hello all,Since Cisco has now known about this issue for 3 weeks, and has failed to correct it, I though I would post it here to warn everybody.I setup my router (WRVS4400N v2 with latest version 2.0.0.8 firmware) with the intention to create one SSI...