Routers - Small Business

Hello Everyone,I have a RV042 with latest Firmware installed on the company side. On my Computer I have the latest version of the QuickVPN Client installed.The Client-Computer is running Windows VISTA Home Premium... I guess this is the major-problem...

I have a UC520 and i just upgraded to the 8.0.2 software pack. I also added SIP for Skype SIP trunk - when i make a call the router resets. When i do a show ver is see this line - System returned to ROM by error - a SegV exception.

Hello,lately i have some strange Problems with the WRV210 of a customer. The WRV210 ist set up for QuickVPN User. Normally it works like a charm to connect with the QuickVPN Client to the Router. But the problem starts, when a QuickVPN Session is not...

I just wasted 3 hours of my life trying to block traffic to unauthorized DNS servers from my RV082.I created rules to block both TCP and UDP port 53 from the LAN side, and created rules to allow traffic to authorized DNS servers (OpenDNS). No matter ...

I established a VPN between 2 RV042 (from point A to point B). I want to direct all traffic, including internet browsing exclusivly thru only one of the RV042's (ie everybody at point B has to access the network at Point A, and also browse the intern...

I have Linksys WRVS4400N Wireless-N Gigabit Security Router - VPN V2.0, as I am unable to block websites and keywords in Internet Policy Settings (Features like website blocking by URL Address and website blocking by keyword did not effect in Interne...

My RVL200 firmware 1.1.12.1WAN is configured for PPPoE. The connection to the Internet is via Thompson SpeedTouch ST780 ADSL router in bridge mode.The  RVL200's PPPoE fails to automatically reconnect to the Internet after a  power loss (or if I click...

Hi there,I am planning to get RV082 VPN Router for my corporate of 50 users. However, there are some clarifications to make for deciding on the model;Does it work with Radiu Server i.e. Using VPN client to connect via Radius server using Active Direc...

The "SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide" says on page 124 "The Management VLAN is set to VLAN 100 by default, but can be modified." (highlighting is mine).   I'm still searching for how.  Anyone know the trick?  I always end up ...

Dear All,     I just purchased a WRVS4400N VPN Security Router V2 and the main reason was for me to be able to segregate between VLANs and to be able to control bandwidth. Now I have tried everything possible to control Bandwidth using Rate Control. ...

I have a WRVS440N.  I'm trying to setup a site-to-site VPN to an ASA 5505 running 8.3.  I have it running.  If I add a traffic filter to the crypto map on the ASA, the VPN won't connect.  That's because the crypto maps don't match.  Is there any way ...

I recently updated my RV016 firmware from 2.0.10 to 3.0.0.19-tm.  I did this specifically because the router was not allowing access to comcast.net and a technician from Comcast informed me that he's seen problems with Linksys/Cisco routers causing t...

I have a client with 2x WRVS4400N VPN Routers.  One on the East Coast, one on the West.  On the West Coast we have a 3COM NBX 100 phone system and we would like to setup one of the phones on the East Coast thru the VPN.  For all the bells and whistle...

i've recently tried to download suse 11.3 via bittorrent.first the speed in µTorrent 2.0.2 went straight to the bandwith maximum, but after a view minutes it went lower and lower till it reached about 2-3 kbps.curious about this, i've checked the Pee...

I just purchased an RV120W to replace my PIX515 (Overkill) and Linksys wireless router (Constantly dropping wireless signal).I need to create a single VPN Site to Site tunnel back to my data center where I have all of my client's networks terminated ...