Routers - Small Business

This has been gradually getting worse. We have two WRV210 routers setup in a site to site VPN. One of the routers has to be reset multiple times per day because it locks up. When this occurs, the VPN breaks connectivity and the internal users of that...

Thank you for your time. I have created and attached a Word Document discussing the Cisco Model RV016 16 port wired Router port forwarding functions for your review. I would appreciate your time in reviewing it with your comments and suggestions.Than...

Hi,I was wondering if anyone here is using a  feature to block access to proxy HTTP servers? This doesn't necessarily  have to be related to RVS4000 ('cause I believe other devices have it  also), although this is the router I'm using. The feature de...

Hi,Can anyone clarify what does "1 year limited liability warranty" offer. This is with refrence to 1900 series router warranty.I checked the Cisco Warranty Q&A (https://www.cisco.com/en/US/prod/warranty_qa_guest.html) page but it does not also menti...

I created 5 firewall->port forwarding->rules...What I wanted was to forward a particular port from the WAN to a particular LAN IPAll 5 showed up in the IPv4 Firewall rules, but only the first line that is enabled works.If I disable the first line, th...

I purchased an RV 120W to replace a Netopia R910 router in our office.  The reviews I read were good and the data sheet sounded like a good match.  Here is my issue... We connect to various client sites using RDP connections, and many some of the sit...

heyI am trying to set up a IPSec vpn tunnel between a RVS4000 and a WRV210both diviceses are placed behind a modem/router on a differend locationwhen I tested in a lab environment it worked wellthere the wan site where both connected in de same lan a...

Hello,I have a lan with many PCs, i want to log all internet access so i have installed a syslog server. My router is a Cisco RVS4000 which have syslog possibilities.Some PCs have fixed IP adress but others are in DHCP.I activate log into the RVS4000...

I just purchased a new cisco 881 integrated service router for my small business.I'm reasonably computer literate, but this is not my speciality and would appreciate some detailed help.I've already spent the day perusing every lead through the cisco ...

I have inherited a RV082 setup and having an issue I can't seem to fix or even really diagnose with port forwarding.  In order to get Windows RDP working on the various computers in the office, I need to forward a different port to each computer.  I ...

A couple of weeks ago, my RVL200 lost its SSL VPN functionality.  All appears to be working fine, until I try to open the VPN tunnel, at which point Windows/IE security won't let the ActiveX add-on run, because the certificate for xtunnel.cab is expi...

I am trying to obtain a stable teleworker / homeoffice setup with our offices UC540 box.Currently, I am using an SR520 router at the teleworker site. I configured the SR520 for one location with Cisco Configuration Assisstant and it worked okay. The ...

I have been trying to forward port 8080 from our public IP address to our local 192.168.1.20 server using the GUI. No Luck.I have restored to factory defaults and just tried to forward this port. No Luck.I have tried to use the CLI. No Luck, but I wa...

One of my clients reports very slow internet from time to time.  During these times, Wireshark reports fairly light LAN traffic.   6/17 in particular was very slow.  Below is my IPS log from that day.  ISP states that we are maxing our T1 bandwidth. ...

I am a bit lost since I have not done this before. I inherited a job that is a mess and i cannot figure it all out. The setup I need to use right now is 2 RVS4000 routers that I need to hop together which I have not done before but I assume I would j...