Routers - Small Business

Hello!I'm using the WRV200 Router (1.0.39) with an ADSL-Modem (Thomson) to connect to an Austrian ISP. So i have to use the PPTP-Connection to "dial in".When i'm using this setting DDNS-Update via dyndns.org fails. The Status always says "diasabled"....

I have about 12 carts that I take to various events that the several carts need to talk to each other (via wireless bridges via a private subnet) and access the internet.  At the same time, I need to connect to a data stream that is on a shared netwo...

I am using RV042 router with firmware  1.3.12.19-tm.I have two live IP address which I'd to assign to a two PCs on my LAN. When I setup one-to-one NAT the two machines become accessible from the internet. However no outbound traffic then works for th...

After updating firmware to 3.0.0.19 on our RV016 router the log file is showing an error about every 70 seconds.Event type: Authentication FailureMessage: 2010/02/24 17:20:34 Bad login attempt for user: (null)It doesn't seem to have any affect on the...

I have a scenario where I have a PBX (10.0.0.xxx) on the Lan of the router.Wan 1 has an internal address of my customers network 192.168.1.xxx and is connected to his switch, his mail server is on this local network @ (192.168.1.2).Wan 2 has a public...

I'm attempting to set up an IPSEC VPN connection between my RVS4000 at home and my Fortigate 200A at work.  I've verified all Phase 1 and Phase 2 settings and checked to make sure the shared key is identical on both units.  When I try to initiate a c...

Has anyone had any experience with the RVS4000 and gettting them to be PCI compliant? I have several RVS4000's in place for credit card terminals. When the port scan is run everything passes but the test for UDP probes with a source port of 53 vs som...

Hello! I'm using the WRV200 Router (1.0.39) with an ADSL-Modem (Thomson) to connect to an Austrian ISP. So i have to use the PPTP-Connection to "dial in".When i'm using this setting DDNS-Update via dyndns.org fails. The Status always says "diasabled"...

HiI got a RVL200 with 4 vlans.I need dhcp server from the router on 3 af the vlans. But the last one last one i have a Microsoft SBS server, so i don't what the router too give out ip adresses on that vlan. But it look likes when the DHCP server i is...

Do you have to have a SMARTnet contract to upgrade the firmware on a SRE520? If not how can you go about doing it?-Ted

In my case the link would be http://192.168.1.1/f_general.htm and is not reachable. All browsers and all PC's cannot reach this page from my domain. It's also not reachable from the routers direct Ethernet ports. Seems to be a firmware revision issue...

Hi there,we setup a VPN Server from the CCA. We used the default Security -> VPN Server path. We then exported the VPN Profile to a PCF file.The Cisco VPN client works fine on 32bits operating systems.How do we set this up on Vista and Windows 7? The...

I'm experiencing 2-3  minutes delays in a Webex session when connected to the  RV082.If I'm connect  directly to the cable modem everything works fine.Switching off the firewall on RV082  doesn't help. Are there any other settings which can be change...

Hello,i have a problem with RV042. My ISP gives me automaticly IP address and i had no problems using different types of routers to get the IP. With RV042 i just can't get it. It says, the port is up, i see the packets/traffic, front control light is...

I'm sorry if this has been brought up but after scouring google for two days and half a bottle of advil(from the headache).  I have resorted to asking for help form the cisco gurus.  The situation is I have two rv082s running latest firmware 2.0.0.19...