Cisco’s security team has released an advisory for: RV340 Series Small Business routers (PSIRT Notice) Fix for bug CSCwc53007- RV34x GUI not accessible – The recommended fix is to upgrade to firmware version 1.0.03.29RV082, RV042, RV016 (PSIRT Noti...
Forum Posts
Hello! This sticky-post will serve as a sign-post for incoming community members. Below you will find links to pages that you may find helpful. Virtual Assistant - Discover support content and options for your gearSupport page index - Contains a...
Resolved! RV260 routing OpenVPN traffic
Hello Everyone.I have successfully configured OpenVPN server on my router (LAN IP 192.168.0.3). VPN client connection works fine... almost. I am using Split Tunnel, routing client traffic destined to the following subnets through VPNoption in order t...
Router model RV345P with last firmware. For example has 2 networks VLAN1 and VLAN2.Printer lives in VLAN2 network.It must be discoverable not only throw direct IP.Is it possible? P.S.: Inter-VLAN enabled, I can ping it, port on printer is reachable. ...
How do you change the default 192.168.1.0/24 on a RV260W router? thank you
Hello,I cannot deactivate the PPTP server on a RV320 firmware 1.3.1.12 or change the address range displayed. If I install newer firmware, will this solve the problem? With old firmware it works.Thank you for your help
Hello. I'm quite new to this CISCO box. I had the IPsec setup with a Mac but was having trouble with the Windows 10 built in client. Finally got some really helpful technicians from CISCO who connected to my router and sorted out the issues. While do...
Hello,I would like to know if it is possible to configure VPN remote access on both sites of a IPSec tunnel ?Currently 2 sites are connected via L2L Ipsec tunnel. Teh tunnnel is restriceted to the use of 2 backup syustèmes on each side. Due to the re...
Resolved! Acces Rules cisco rv325
Hello, I want to enter a debian server that I have connected in my work, I want to enter via SSH, but I do not know how I have to activate the firewal so that it allows me to enter from the public IP to the IP of said server with port 22.I hope you c...
Hola quiero ingresar a un servidor debian que tengo conectado en mi trabajo, quiero ingresar via SSH, pero no se como tengo que activar el firewal para que me deje ingresar desde la ip publica al ip de dicho servidor con el puerto 22.Espero me puedan...
Hi everyone, I need to assign 2 vlans to the wan port of rv160, this is possible
Hello My VLAN1 config is like below: 192.168.17.1/24DHCP Server: 192.168.17.100-192.168.17.149and my SSL VPN pool is:10.0.0.0/24How to allow SSL VPN user to access to remote VLAN?Thanks in advanceLK
I was in the middle of setting up AD Authentication for PPTP VPN on an RV340, went to login today and now I get invalid username/password. Could this be related to me not being able to login?
Hello I try to enabled the Active Directory for remote User on the RV340 and it do not work.In the system Configuration\User Accounts I enabled the optionConfigure the option Even then it's still not working But i work with local user. Any suggestion...
Hi, I have a RV325 and 2 ISPs connected. Only one is use normally, and the other one is used as backup. This is because load-balancing does not work that well (the router does not appear to keep track of conversations, so all internet banking apps st...
Team,Who has an example of the RESTCONF(/NETCONF) capabilities of the Cisco RV34x/32x series routers?It has the capabilities but there's no documentation on how to use it. CheersDJ
I bought this router based on the dual wan capabilities, wan to lan throughput and the brand fame. Unfortunately, I made a huge mistake. Apart from the fact that the support of a brand new product is zero and below, this piece of junk continues to cr...
