Cisco’s security team has released an advisory for: RV340 Series Small Business routers (PSIRT Notice) Fix for bug CSCwc53007- RV34x GUI not accessible – The recommended fix is to upgrade to firmware version 1.0.03.29RV082, RV042, RV016 (PSIRT Noti...
Forum Posts
Hello! This sticky-post will serve as a sign-post for incoming community members. Below you will find links to pages that you may find helpful. Virtual Assistant - Discover support content and options for your gearSupport page index - Contains a...
Resolved! vpn between RV340 and RV320
I am for my Life trying to setup an IPSec VPN between my RV 340 and my RV320 but it will not connect. I have updated to the latest FW (RV340 1.0.03.16 andd RV320 1.5.1.05) but it will not link, the RV340 even shows that the link is up but the RV320 d...
I have a RV320 that apparently has an invalid SSL certificate installed on it. I have attempted to "factory reset" the device with pushing the reset button for 10+ seconds. This has had no effect and the device admin page continues to be locked out...
Dear, My RV340W had been no response last week. it happened so suddenly.After hard reset, it still no working. All the function doesn't work. I can't access and ping the default web console 192.168.1.1And My computer get this IPIPv4: 169.254.90.116Su...
Hiya. We've got an RV320. I'm trying to run an OpenVPN server behind it. I've opened the ports - for restriction reasons I'm trying to run it as TCP on 443 (make all packets look like generic https packets). I want to run it on a server behind to ...
Hi.I have a CISCO887VA-K9 router which was configured by a previous IT Manager. I have never needed to interface with the unit before and I don't have any manuals Our Internet Service Provider has given me updated IP and login credentials for their ...
I'm a newbie Cisco RV260 router owner. I want to provide RDP service for one user. I added the service for port 3389. I added a port forwarding entry. I added an Access Rule allowing access to the RDP service from the user's IP address only. This wor...
I have turned off the firewall to eliminate that as a culprit and set the appropriate port forwarding rules using WAN1.1 as the interface instead of WAN1. If I set it to WAN1, I can reach the local server on public ip .57, if I set it to WAN1.1 I ca...
Ive purchased a Cisco RV340 to use a site to site VPN to another company. I have setup the VPN as per their document without issues, but when it comes to traffic across said tunnel, this is where I am having issues. I started out with a Draytek 2862,...
I have a site running a rv042 small business VPN router. It is not passing PCI compliance scans because it has expired certificates, and old tls, etc etc. I downloaded new firmware "RV0XX_v4.2.3.10_20191004-code.bin" and it uploads but then just goe...
Hello Experts! I have the latest firmware (1.0.03.15) on my Cisco RV340W and it worked OK for a bit, but now I cannot access the Web GUI to manage the router. I've removed power twice but trying to access the router gives me a timeout error with a...
Resolved! SA520W Firewall malfuntion?
Hi, guys. I have an old SA520W Small business router, appearing to works fine. But I'm suspecting it is not exactly true. Both IPS / Protectlink licenses are unavailable (IPS license expired and Proteclink not licensed). I'm quite tired to check mult...
Hi All, I'm trying to move the existing configuration from our old RV215W wireless router to the new RV340W wireless router but the config file I exported from the RV215W has different file format than the RV340W supports. Can anyone advice any alter...
Resolved! IPv6 on Cisco RV345 on IPv4 Only ISP?
We're moving from our ISP-supplied Cambium Networks router to a Cisco RV345 in March. Our ISP currently only supports IPv4 (we've confirmed this with an IPv6 test). I know the Cisco RV345 can support dual IPv4/IPv6 mode, or we can disable IPv6 mode ...
Hi im trying to forward a port on my 877va but i cant get it to work. I want to allow access to my servers files the port i want to forward is 32400 ive added the permit commands to no avail pls take a look at my config I must be missing something si...
I've recently purchased a Cisco RV260 and tried to setup a PPTP to access the network remotely. I'm getting the following error when trying to connect. It appears this has been an issue with the with the RV340 & RV260 as well. Has anyone found a solu...
