Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
467
Views
0
Helpful
1
Replies

Cisco WAP 4410N

JoshuaBowman97494
Level 1
Level 1

‎06-19-2020 09:05 PM

I am trying to set this up as a POE for another part of my house. I programmed my switch to give Port 8 48volts and connected the router. The router powers up and seems to be working. But I can not log on to the wifi. So I tried unhooking the poe from the switch and putting it into a non POE port and it logged in and got me right online. Am I missing something?

Labels:
0 Helpful
1 Reply 1

Sujoy Paria
Cisco Employee
Cisco Employee

‎06-30-2020 09:05 AM

Hi,

WAP4410N Access Point does come with a Power Adapter in package content. I hope the power adapter was connected once you are moving the device to non PoE port. Please check whether you are able to ping the device once it is connected to the PoE port, if successful then need to verify the wireless settings by logging into the WAP4410N device to get an idea what is causing the issue. Other parameters like switch port configuration, DHCP settings also need to verify.

WAP4410N is End-of-Support product now. You may refer the following links to setup the device…

https://www.cisco.com/c/dam/en/us/td/docs/wireless/access_point/csbap/wap4410n/quick_start/guide/WAP4410N_QuickStartv2.pdf

https://www.cisco.com/c/dam/en/us/td/docs/wireless/access_point/csbap/wap4410n/administration/guide/WAP4410N_Admin_Guide.pdf

https://www.cisco.com/c/en/us/products/collateral/wireless/small-business-wireless-access-points/data_sheet_c78-501860.html

0 Helpful
Customers Also Viewed These Support Documents