01-26-2021 02:51 PM
ShrewSoft client was working fine with RV260W, firmware version 1.0.00.17. Installed 1.0.01.02 and ShrewSoft clients can no longer connect. Message is "User Authentication Error." All clients are affected. No other changes on either end.
01-27-2021 01:49 AM
Hi there,
Double-check VPN settings on the RV if something has been affected with the new software and then restart the ShrewSoft clients and the RV as well.
If the problem persists you could enable the syslog and gather the error messages for analysis.
Regards,
Martin
02-27-2021 11:56 PM
I upgraded from 1.0.01.01 to 1.0.01.02. Right before fw upgrade VPN clients were able to connect, no issues. There were no changes made. After fw upgrade to 1.0.01.02, user is getting same error 'user authentication error'.
I rebooted the router RV260W one more time, then VPN users were able to connect.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide