01-19-2021 04:09 PM
Can you manually setup hairpinning in a RV340 router? if so help is needed.
01-20-2021 01:38 AM
not sure what is the requirement here for the hairpin for the intra lan ?
check this thread :
https://community.cisco.com/t5/small-business-routers/rv320-hairpin-intra-interface/td-p/2456325
01-20-2021 03:04 AM - edited 01-20-2021 03:04 AM
Hello Jay,
If by saying hairpinning you mean communication between two LAN hosts behind your router using their mapped endpoint i.e. where one of the hosts on the LAN is able to access another host on the LAN via the external WAN IP address of the router (with port forwarding set up on the router to direct requests to the appropriate host on the LAN) that is not supported by the RV34x series.
Hairpinning is supported on Cisco IOS-based ASAs and ISR routers.
Regards,
Martin
01-20-2021 03:42 AM
Hi,
NAT hairpinning option was available in ISA500 series devices but now that Small Business device is End-of-Sale and End-of-Support since 2014.
In RV340 series Router that option is not available.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide