cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2163
Views
5
Helpful
4
Replies

How to disable DHCP Server on SRP547W?

supporto01
Level 1
Level 1

Hi, I've purchased a router SRP547W and I would disable DHCP server.

On the control panel I can't see anything about disabling this function. I don't need dhcp server on router and I don't need dhcp relay.

My firmware version is 1.2.4_003.

Best regards,

Luciana

1 Accepted Solution

Accepted Solutions

Andrew Hickman
Cisco Employee
Cisco Employee

Hi,

To disable DHCP Server, jusr change the address type for your VLAN interface to dynamic or - more likely - static.  You can manally set the local IP address from there.

Regards,

Andy

View solution in original post

4 Replies 4

Andrew Hickman
Cisco Employee
Cisco Employee

Hi,

To disable DHCP Server, jusr change the address type for your VLAN interface to dynamic or - more likely - static.  You can manally set the local IP address from there.

Regards,

Andy

Hi,

thank you for your quick reply.

So, if I set static ip address on vlan, automatically the dhcp server is disabled?

Could I ask you if there's any way to enable telnet on that device?

I'n new to cisco products, I used to manage different devices...

Regards,

Luciana

Correct - when you set a statis address, the DHCP server will be disabled (you don't need to change or delete the DHCP Server object).

There is no Telnet / SSH access to the SRP.  For provisioning, you can use the web GUI, or the .

Regards,

Andy

Thank you very much for your advise.

It works properly

Regards,

Luciana