cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2158
Views
0
Helpful
2
Replies

%IPROUTETABLE-A-ROUTETABLEOVERFLOW: IP routing table overflow: failed to add route address 0.0.0.0, mask 0.0.0.0, nexthop 192.168.1.1

nicolas diogo
Level 1
Level 1

hi

this is the first time that i post something on this forum - please allow me some degree of understanding as i do not work in network.

i am just setting up a small lab

i have a SG300 swtch in L3 mode, and it seems to lock up the aggregated ports (LAG) that i have setup

they work fine for a while - but then the system stops responding and i find this on the switch log (see below).

i have editing the network configuration on the system (debian 6) but nothing worked.

as soon as i edit something minor on the switch or reboot it.

i have network access to the debian system restored.

so i believe the problem is with the switch.

the router that distributes the IP is an old netgear (sorry!)

the messages below make so sense to me.

i would sincerely appreciate assistance in solving this problem.

please let me know if further info is needed.

thanks,

Nicolas

2147476713     2013-May-02 08:06:54    Informational         %AAA-I-CONNECT: New https connection for user cisco, source     192.168.1.23 destination 192.168.1.254 ACCEPTED     

2147476714     2013-May-02 08:06:53    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (1)     

2147476715     2013-May-02 08:06:15    Alert         %IPROUTETABLE-A-ROUTETABLEOVERFLOW: IP routing table overflow:     failed to add route address 0.0.0.0, mask 0.0.0.0, nexthop     192.168.1.1     

2147476716     2013-May-02 08:06:15    Informational         %BOOTP_DHCP_CL-I-DHCPRENEWED: The device has been renewed the     configuration on interface Vlan 1 , IP 192.168.1.254, mask     255.255.255.0, DHCP server 192.168.1. 1    

2147476717     2013-May-02 08:05:32    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (2)     

2147476718     2013-May-02 08:03:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476719     2013-May-02 08:02:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (3)     

2147476720     2013-May-02 07:58:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476721     2013-May-02 07:57:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (3)     

2147476722     2013-May-02 07:53:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476723     2013-May-02 07:52:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (2)     

2147476724     2013-May-02 07:51:15    Alert         %IPROUTETABLE-A-ROUTETABLEOVERFLOW: IP routing table overflow:     failed to add route address 0.0.0.0, mask 0.0.0.0, nexthop     192.168.1.1     

2147476725     2013-May-02 07:51:15    Informational         %BOOTP_DHCP_CL-I-DHCPRENEWED: The device has been renewed the     configuration on interface Vlan 1 , IP 192.168.1.254, mask     255.255.255.0, DHCP server 192.168.1. 1    

2147476726     2013-May-02 07:48:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476727     2013-May-02 07:39:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (3)     

2147476728     2013-May-02 07:36:15    Alert         %IPROUTETABLE-A-ROUTETABLEOVERFLOW: IP routing table overflow:     failed to add route address 0.0.0.0, mask 0.0.0.0, nexthop     192.168.1.1     

2147476729     2013-May-02 07:36:15    Informational         %BOOTP_DHCP_CL-I-DHCPRENEWED: The device has been renewed the     configuration on interface Vlan 1 , IP 192.168.1.254, mask     255.255.255.0, DHCP server 192.168.1. 1    

2147476730     2013-May-02 07:35:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476731     2013-May-02 07:34:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (2)     

2147476732     2013-May-02 07:30:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476733     2013-May-02 07:27:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (1)     

2147476734     2013-May-02 07:25:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476735     2013-May-02 07:24:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (4)     

2147476736     2013-May-02 07:21:15    Alert         %IPROUTETABLE-A-ROUTETABLEOVERFLOW: IP routing table overflow:     failed to add route address 0.0.0.0, mask 0.0.0.0, nexthop     192.168.1.1     

2147476737     2013-May-02 07:21:15    Informational         %BOOTP_DHCP_CL-I-DHCPRENEWED: The device has been renewed the     configuration on interface Vlan 1 , IP 192.168.1.254, mask     255.255.255.0, DHCP server 192.168.1. 1    

2147476738     2013-May-02 07:20:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (2)     

2147476739     2013-May-02 07:17:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476740     2013-May-02 07:16:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (4)     

2147476741     2013-May-02 07:12:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476742     2013-May-02 07:09:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (2)     

2147476743     2013-May-02 07:06:15    Alert         %IPROUTETABLE-A-ROUTETABLEOVERFLOW: IP routing table overflow:     failed to add route address 0.0.0.0, mask 0.0.0.0, nexthop     192.168.1.1     

2147476744     2013-May-02 07:06:15    Informational         %BOOTP_DHCP_CL-I-DHCPRENEWED: The device has been renewed the     configuration on interface Vlan 1 , IP 192.168.1.254, mask     255.255.255.0, DHCP server 192.168.1. 1    

2147476745     2013-May-02 07:05:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (1)     

2147476746     2013-May-02 07:04:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476747     2013-May-02 07:03:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (3)     

2147476748     2013-May-02 06:59:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476749     2013-May-02 06:54:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (3)     

2147476750     2013-May-02 06:51:15    Alert         %IPROUTETABLE-A-ROUTETABLEOVERFLOW: IP routing table overflow:     failed to add route address 0.0.0.0, mask 0.0.0.0, nexthop     192.168.1.1     

2147476751     2013-May-02 06:51:15    Informational         %BOOTP_DHCP_CL-I-DHCPRENEWED: The device has been renewed the     configuration on interface Vlan 1 , IP 192.168.1.254, mask     255.255.255.0, DHCP server 192.168.1. 1    

2147476752     2013-May-02 06:50:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476753     2013-May-02 06:49:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (3)     

2147476754     2013-May-02 06:45:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476755     2013-May-02 06:44:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (3)     

2147476756     2013-May-02 06:40:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow     

2147476757     2013-May-02 06:39:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (2)     

2147476758     2013-May-02 06:36:15    Alert         %IPROUTETABLE-A-ROUTETABLEOVERFLOW: IP routing table overflow:     failed to add route address 0.0.0.0, mask 0.0.0.0, nexthop     192.168.1.1     

2147476759     2013-May-02 06:36:15    Informational         %BOOTP_DHCP_CL-I-DHCPRENEWED: The device has been renewed the     configuration on interface Vlan 1 , IP 192.168.1.254, mask     255.255.255.0, DHCP server 192.168.1. 1    

2147476760     2013-May-02 06:35:56    Error     %ARP-E-ARPTBL: ARP     Table Overflow, aggregated (1)     

2 Replies 2

paolo bevilacqua
Hall of Fame
Hall of Fame

Wrong forum, post in "small business routers". You can move your post using the actions panel on the right.

moved as suggested by Paolo.

the equipment that i am having problem with is a SG300-10 (cisco)

while the router (which is working fine) is from Netgear.

thanks,

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: